Skip to the content
2 layers203.6 × 133.9 mmDvostrano napajanje sa potenciometrom x109cs, the printed circuit board in 3D

Dvostrano napajanje sa potenciometrom x109cs

6nick6/Dual-power-supply

Projekat PCB

Size
203.6 × 133.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
75
Nets
86
Pads
248
Tracks, vias
627, 38
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
28 Aug 2025
Updated
28 Aug 2025

Overview

Dvostrano napajanje sa potenciometrom x109cs is an open-source printed circuit board by 6nick6, from the 6nick6/Dual-power-supply repository on GitHub. It is a 2-layer board of 203.6 × 133.9 mm with 75 parts on 86 nets, routed with 627 tracks and 38 vias.

It is built around the X9C103SZ, LM317T and 529702B02500G, with the 2SA1837, 703W-00/08 and QBLP631-IW among its other parts. Its parts include 23 capacitors, 12 resistors, 8 ICs, 7 diodes and 5 connectors. It belongs with the STM32 boards of this library.

Main components

7

Parts

75
QtyValueFootprintReferences
810KResistor_SMD:R_0805_2012MetricR4, R5, R6, R7, R8, R9, R11, R12
6529702B02500G529702B02500G:HSINK_529702B02500GHS1, HS2, HS3, HS4, HS5, HS6
4100nFCapacitor_SMD:C_0805_2012MetricC18, C19, C20, C21
41N4002Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2, D3, D4, D5
422pFCapacitor_SMD:C_0805_2012MetricC14, C15, C16, C17
20034.3119Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_OpenF2, F3
21TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ2, J3
2100nFopamp cap:CAPC2012X70C9, C10
2100nF/16VCapacitor_SMD:C_0805_2012MetricC2, C5
2100uFCapacitor_THT:CP_Radial_D7.5mm_P2.50mmC11, C12
2100uF/25VCapacitor_SMD:C_0805_2012MetricC3, C6
24700uF/35Vrect_cap:CAPPRD750W80D1800H4200C1, C4
2X9C103SDIGITAL POT:SOIC127P600X175-8NU1, U3
10.1uFCapacitor_SMD:C_0805_2012MetricC8
10.22uFCapacitor_SMD:C_0805_2012MetricC7
10.47uFCapacitor_SMD:C_0805_2012MetricC22
10034.3105Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_OpenF1
11062TRbattery holder:BAT_1062TRBT1
1120RCapacitor_SMD:C_0805_2012MetricR1
11KResistor_SMD:R_0805_2012MetricR10
11N5402/3A/200VDiode_THT:D_DO-201AD_P15.24mm_HorizontalD6
11uFCapacitor_SMD:C_0805_2012MetricC13
1220RResistor_SMD:R_0805_2012MetricR3
1240RCapacitor_SMD:C_0805_2012MetricR2
12SA1837Package_TO_SOT_THT:TO-220-3_VerticalQ1
12SA4793Package_TO_SOT_THT:TO-220-3_VerticalQ2
132.768KCrystal:Crystal_C26-LF_D2.1mm_L6.5mm_VerticalY1
133uFCapacitor_SMD:C_0805_2012MetricC23
1703W-00/08TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_HorizontalJ6
18MHzCrystal:Resonator-2Pin_W10.0mm_H5.0mmY2
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1FLAT za displejfootprints:CONN_XG4A-1631_OMRJ5
1LM317TPackage_TO_SOT_THT:TO-220-3_VerticalU4
1LM337_TO220Package_TO_SOT_THT:TO-220-3_VerticalU2
1LM3940Package_TO_SOT_THT:TO-220-3_VerticalU8
1LM741Package_DIP:DIP-8_W7.62mmU6
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU5
1QBLP631-IWLED_SMD:LED_0805_2012MetricD7
1STM32F103C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU7
1SW_PushButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW1
1VPP28–090VPP28_090:XFMR_VPP28-090T1
1VS-KBPC101Diode_THT:Diode_Bridge_Vishay_KBPC1D1

The 71 most common of 75 parts.

Similar boards

  • 2 layers120 × 100 mmSKYLF, the printed circuit board in 3D

    SKYLF

    impatrq/avis2024

    Nuestro proyecto es continuar con el simulador de vuelo que empezo el grupo llamado "AVIS" en 2019, destinado a practicar maniobras y replicar las condiciones de vuelo reales dentro de una cabina que simula los…

    30 parts1
  • 2 layers100 × 63 mmSimpleHybrid, the printed circuit board in 3D

    SimpleHybrid

    ljuszkie/headHybrid

    Simple hybrid headphone amplifier

    55 parts
  • 2 layers100 × 50 mmMonitor solar v2, the printed circuit board in 3D

    Monitor solar v2

    Laboratorio-Robotica-UTN-Fra/Monitor_solar

    Se utilizara una placa para tomar la tension y corriente de un panel, escalarla a valores entre 3v3 y 0v para poder utilizar un ADC para realizar la lectura de datos

    35 parts
  • 2 layers100 × 70 mmClassA, the printed circuit board in 3D

    ClassA

    smileym4n-collab/Kicadprojects

    67 parts
  • 2 layers50 × 60 mmMOSTERFET, the printed circuit board in 3D

    MOSTERFET

    Digital-Sqrt/MOSTERFET

    Low cost dule MOSFET driver for heated beds and hotends

    34 parts11
  • 2 layers50 × 60 mmLittle Monster, the printed circuit board in 3D

    Little Monster

    Digital-Sqrt/Little-Monster

    26 parts
  • 4 layers152.4 × 76.2 mmMotherboard, the printed circuit board in 3D

    Motherboard

    mikegoelzer/Homebrew-ECP5-SBC

    Kicad files for homebrew hobbyist computer with custom RISC-V CPU

    160 parts
  • 2 layers99.1 × 99.1 mmPower supply panelized, the printed circuit board in 3D

    Power supply panelized

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    223 parts75

Questions

How big is the Dvostrano napajanje sa potenciometrom x109cs PCB?

It measures 203.6 × 133.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dvostrano napajanje sa potenciometrom x109cs use?

75 parts, built around the X9C103SZ, LM317T, 529702B02500G and 2SA1837. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dvostrano napajanje sa potenciometrom x109cs KiCad files?

From the 6nick6/Dual-power-supply repository on GitHub, at the commit this page was made from: the board is Dvostrano napajanje sa potenciometrom x109cs.kicad_pcb and its schematic Current amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dvostrano napajanje sa potenciometrom x109cs design in my own project?

Its repository states no licence, so its author keeps all rights: ask 6nick6 before reusing the design.