2 layers96.5 × 90.7 mm
ColoradoCUBE Payload
coloradocube/bus-sensors
A separate board containing the sensors for the satellite bus. The sensors are the telemetry data sources.
58 parts
4 layers101.6 × 53.3 mm
Sensorboard due
imjc8/sensorboardSensor board PCB
- Size
- 101.6 × 53.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 159
- Pads
- 380
- Tracks, vias
- 235, 29
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Dec 2019
- Updated
- 25 Jun 2021
Overview
Sensorboard due is an open-source printed circuit board by imjc8, from the imjc8/sensorboard repository on GitHub. It is a 4-layer board of 101.6 × 53.3 mm with 62 parts on 159 nets, routed with 235 tracks and 29 vias.
It is built around the MAX31865AAP+, HSCDANN001BA2A3 and MS580502BA01-50. Its parts include 20 capacitors, 9 connectors, 8 ICs and 6 resistors.
Main components
3
MAX31865AAP+
SSOP-20-40℃~+125℃ 1 1.5mA 15 1LSB 3V~3.6V Digital filtering SPI Sensor Conditioner Sigma-Delta SSOP-20 ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)Temperature Sensors
HSCDANN001BA2A3
DIP-8-20℃~+85℃ 0pa~1bar 1000pa 3V~3.6V 460us I2C、SPI DIP-8 Pressure Sensors ROHSHoneywellPressure Sensors
MS580502BA01-50
SMD-4P-40℃~+85℃ 1.8V~3.6V 30Kpa~1.2bar Integrated ADC and digital interface Yes SMD-4P Pressure Sensors ROHSTE ConnectivityPressure Sensors
README
sensorboard_due_v2/README.mdSensorboard PCB v2
Changes from v1
- Schematic will reflect intended PCB design, not current breadboard setup
- More connectors need to be added on for expansion. I2C address conflict issue (for at least additional IMUs) will need to be addressed.
- Sensor board will be generic enough to be reused multiple times if needed
- LED panel connector fix? (missing GND wire)
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 +4 |
| 6 | 400 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 6 | Conn_01x04_Male | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1, J3, J6, J7, J8, J9 |
| 6 | MAX31865AAP+ | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | U2, U3, U5, U6, U7, U8 |
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP11, JP13, JP14, JP17, JP18, JP20 |
| 6 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP12, JP15, JP16, JP19, JP21, JP22 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP7, JP8, JP9, JP10 |
| 1 | ARDUINO_DUE | ARDUINO_DUE:ARDUINO_DUE_Shield_wSPI | PCB1 |
| 1 | DS3231_RTC_BREAKOUT | arduino_sensors:DS3231_RTC_Breakout | H2 |
| 1 | GPS_UBLOX_NEO6M | Connector_Molex_70553:70553-0038_4P | J4 |
| 1 | HSCDANN001BA2A3 | arduino_sensors:HSCDANN001BA2A3_DIP8 | U1 |
| 1 | I2C_SLAVE | Connector_Molex_70553:70553-0002_3P | J2 |
| 1 | MPU-9250_Breakout | arduino_sensors:MPU-9250_Breakout | H1 |
| 1 | MS5805-02BA01 | arduino_sensors:MS5805-02BA01 | U4 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3BT-DSF-PEJS | J5 |
Questions
How big is the Sensorboard due PCB?
It measures 101.6 × 53.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Sensorboard due use?
62 parts, built around the MAX31865AAP+, HSCDANN001BA2A3 and MS580502BA01-50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensorboard due KiCad files?
From the imjc8/sensorboard repository on GitHub, at the commit this page was made from: the board is sensorboard_due_v2/sensorboard_due.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensorboard due design in my own project?
Its repository states no licence, so its author keeps all rights: ask imjc8 before reusing the design.
Similar boards
- 4 layers161 × 100 mm
- 2 layers80 × 80 mm
Lupa
jorticus/lupa-espresso
Espresso controller firmware for an E61-grouphead style espresso machine
74 parts6GPL-2.0 - 2 layers80 × 62 mm
- 4 layers100 × 100.1 mm
Master-4layers
DepBo/AquaCare
AquaCare là hệ thống theo dõi và quản lý nuôi trồng thủy sản, gồm ứng dụng web, ứng dụng di động và backend kết nối dữ liệu cảm biến với thiết bị trong ao/bể.
135 parts1 - 2 layers100 × 80 mm
Brewingstation3
Gr3yh0und/brewingstation
Automate your brew day: ESP32 + induction cooktop + PID control, talking MQTT to CraftBeerPi.
51 parts1MIT - 2 layers65 × 56 mm
TemperatureManagementRPiHat
KozaMateusz/TemperatureManagementGUI
Graphical user interface to controll the temperature in a chamber.
29 parts1 - 4 layers20 × 52 mm
IoT AIO
N5GEH/n5geh.devices.iot_wa_aio
IoT-AIO is a wireless adapter for developing IoT applications for Industrial and Building Automation Systems based on the Espressif chipset ESP32.
58 parts1MIT