2 layers
Kicad pcb
imalsogreg/arte-hardware
Arte hardware files. Useful connector schematics and footprints, EIB designs, preamp designs, amp, etc
30 parts2GPL-3.0
2 layers391.7 × 179.3 mm
Patchboxfinal
imalsogreg/arte-hardware2Arte hardware files. Useful connector schematics and footprints, EIB designs, preamp designs, amp, etc
- Size
- 391.7 × 179.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 95
- Pads
- 505
- Tracks, vias
- 2,480, 280
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 28 Jan 2014
- Updated
- 29 Aug 2018
Overview
Patchboxfinal is an open-source printed circuit board by imalsogreg, from the imalsogreg/arte-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 391.7 × 179.3 mm with 54 parts on 95 nets, routed with 2,480 tracks and 280 vias.
Its parts include 5 capacitors, 4 diodes and 2 resistors. It belongs with the audio and music boards of this library.
README
README.mdarte-hardware
Arte hardware files. Useful connector schematics and footprints, EIB designs, preamp designs, amp, etc
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | IDC10x2correct | , , , , , , , | |
| 4 | CONN_1 | screw | screw1, screw2, screw3, screw4 |
| 3 | C | C1 | C1, C2, C3 |
| 2 | CP | CP4 | C4, C5 |
| 2 | DIODE | D3 | D1, D2 |
| 2 | LED | LED-3MM | D3, D4 |
| 2 | R | R1 | R1, R2 |
| 1 | 4x1 | IDC4x1 | |
| 1 | GS3 | negreg | NegR1 |
| 1 | GS3 | dropout | dropoutR1 |
| 1 | LED_POW_GND | IDC3x2 | |
| 1 | PMETER | PMETER | PMETER1 |
| 1 | POWER_SWITCH | powswitch | |
| 1 | REF1-4 | IDC8x2 | |
| 1 | REF13-16 | IDC8x2 | |
| 1 | REF5-8 | IDC8x2 | |
| 1 | REF9-12 | IDC8x2 | |
| 1 | SWITCH1 | Switch | |
| 1 | SWITCH10 | Switch | |
| 1 | SWITCH11 | Switch | |
| 1 | SWITCH12 | Switch | |
| 1 | SWITCH13 | Switch | |
| 1 | SWITCH14 | Switch | |
| 1 | SWITCH15 | Switch | |
| 1 | SWITCH16 | Switch | |
| 1 | SWITCH2 | Switch | |
| 1 | SWITCH3 | Switch | |
| 1 | SWITCH4 | Switch | |
| 1 | SWITCH5 | Switch | |
| 1 | SWITCH6 | Switch | |
| 1 | SWITCH7 | Switch | |
| 1 | SWITCH8 | Switch | |
| 1 | SWITCH9 | Switch | |
| 1 | TET1-4 | IDC8x2 | |
| 1 | TET13-16 | IDC8x2 | |
| 1 | TET5-8 | IDC8x2 | |
| 1 | TET9-12 | IDC8x2 | |
| 1 | power_male | powermale |
Questions
How big is the Patchboxfinal PCB?
It measures 391.7 × 179.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Patchboxfinal use?
54 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Patchboxfinal KiCad files?
From the imalsogreg/arte-hardware repository on GitHub, at the commit this page was made from: the board is arte-hardware/16-tet-patchbox/patchboxfinal.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Patchboxfinal design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from imalsogreg/arte-hardware
1Similar boards
- 2 layers203 × 26.6 mm
- 2 layers30 × 50 mm
- 2 layers100.1 × 40 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
54 parts766 - 2 layers100 × 120 mm
- 2 layers
- 2 layers104.3 × 38.9 mm
- 2 layers
- 2 layers93.8 × 64.2 mm
PiFinder smt
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
54 parts257GPL-3.0