
BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components

Emf heater is an open-source printed circuit board by ikok07, from the ikok07/emf_heater_pcb repository on GitHub. It is a 2-layer board of 51.6 × 68.6 mm with 28 parts on 11 nets, routed with 100 tracks and 19 vias.
It is built around the IRF3205. Its parts include 7 resistors, 6 capacitors, 5 diodes, 4 connectors and 3 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 470nF | Capacitor_THT:C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 | C1, C2, C3, C4, C5, C6 |
| 3 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2, J4 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R7, R8 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R9, R10 |
| 2 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D6, D7 |
| 2 | D_Zener | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D5 |
| 2 | L_Ferrite (50uH) | Inductor_THT:Ferrite_Inductor | L1, L2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 560 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | LED_PWR | LED_THT:LED_D5.0mm | D2 |
| 1 | Thermal Fuse | Fuse:Thermal_Fuse_12mm | F1 |

stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components


jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller




ampnics/Project-10
Mater KiCad with Projects is a series of lectures in which we are learning PCB designing

It measures 51.6 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ikok07/emf_heater_pcb repository on GitHub, at the commit this page was made from: the board is emf_heater.kicad_pcb and its schematic emf_heater.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ikok07 before reusing the design.