
Guitarray control board
IIP-Group/polymap
Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).

Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).
PoC injector is an open-source printed circuit board by IIP-Group, from the IIP-Group/polymap repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 50 × 43 mm with 39 parts on 26 nets, routed with 171 tracks and 38 vias.
It is built around the AP33771CFBZ-13-FA01, ISP772T and B340AE. Its parts include 11 resistors, 6 capacitors, 5 diodes, 4 connectors and 3 inductors.
Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).
Kicad Ver.: 9.0.4
Vivado Ver.: 2023.2
JUCE Framework Ver.: v8.0.12
To experiment with the PolyMap system without physical access, raw example recording with 64-channels is available for download here: https://iis-people.ee.ethz.ch/~datasets/PolyMap/
This repository contains multiple components under different licenses:
Each subdirectory contains its own license file where applicable.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 2u2 | customFP:ADL3225VM-2R2M | L2, L3 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | B340AE | Diode_SMD:D_SMA | D3, D5 |
| 1 | 1000mA | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10u | customFP:EIA1812 | L1 |
| 1 | 200R | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 47u | Capacitor_SMD:CP_Elec_6.3x5.7 | C2 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 5m | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 66k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 6k8 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 9.1V | Diode_SMD:D_SOD-323_HandSoldering | D4 |
| 1 | AP33771CFBZ-13-FA01 | customFP:AP33771CFBZ13FA01 | U2 |
| 1 | Barrel_Jack | customFP:TENSILITY_54-00131 | J3 |
| 1 | GND | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP4 |
| 1 | Guitar | customFP:BNC7T-J-P-XX-RA-BH2D | J2 |
| 1 | ISP772T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MADIFace | customFP:BNC7T-J-P-XX-RA-BH2D | J1 |
| 1 | Power | LED_THT:LED_D3.0mm | D1 |
| 1 | Status | LED_THT:LED_D3.0mm | D2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J4 |
| 1 | Vbus | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP2 |
| 1 | Vcc | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP3 |
| 1 | Vin | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |

IIP-Group/polymap
Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).

IIP-Group/polymap
Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).

IIP-Group/polymap
Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).

vektorious/attiny_switch
Repository layout: - src/: ATtiny1614 firmware (PlatformIO project) - pcb/: KiCad project and gerbers



winsonlin8/SpinnyKittyCommittee
A rhythm-synchronized speaker system featuring a 3D-printed cat that spins and flashes RGB LEDs in time with music — inspired by this video.


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 50 × 43 mm and has 2 copper layers, 1.09 mm thick.
39 parts, built around the AP33771CFBZ-13-FA01, ISP772T and B340AE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IIP-Group/polymap repository on GitHub, at the commit this page was made from: the board is electrical/poc_injector/PoC_injector.kicad_pcb and its schematic electrical/guitarray_control_board/guitarray_control_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).