

USB C Simple Trig
- Size
- 45.9 × 48.7 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 63
- Pads
- 184
- Tracks, vias
- 554, 97
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jul 2025
- Updated
- 14 Sep 2025
Overview
USB C Simple Trig is an open-source printed circuit board by ihsan-sa, from the ihsan-sa/USB-C-Trigger-Board repository on GitHub. It is a 6-layer board of 45.9 × 48.7 mm with 49 parts on 63 nets, routed with 554 tracks and 97 vias.
It is built around the AP33772SDKZ-13-FA01, BUK7880-55A/CUX and CG04874-8M. Its parts include 19 capacitors, 12 resistors, 4 connectors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
3AP33772SDKZ-13-FA01
QFN-24(4X4)-40℃~+85℃ 3.3V~31V 3.3mA I2C QFN-24(4X4) USB HUB Controllers ROHSDiodes IncorporatedUSB HUB ControllersBUK7880-55A/CUX
SOT-223-3-55℃~+150℃ 1 N-channel 12nC@10V 2V 374pF 55V 62pF 68mΩ@10V 7A 8W SOT-223-3 MOSFETs ROHSNexperiaMOSFETsCG04874-8M
SMD3225-2P-40℃~+85℃ 500Ω 8MHz 8pF Crystal Oscillator ±20ppm ±50ppm SMD3225-2P Crystals ROHSNDKCrystals
README
README.mdUSB-C-Trigger-Board
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C6, C7, C10, C19, C20, C25 |
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C9, C17, C18, C24 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 2 | * | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
| 2 | * | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22, C23 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R8 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C8 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R9 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | BUK7880-55A/CUX | Library:SOT-223-3_TabPin2 | Q1, Q2 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 5m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | AP2127N-3.3 | Package_TO_SOT_SMD:SOT-23 | U10 |
| 1 | AP33772SDKZ-13-FA01 | footprints:AP33772SDKZ13FA01 | IC1 |
| 1 | CG04874-8M | footprints:XTAL_CG04874_NDK | Y1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | STM32C011F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J2 |
| 1 | USB_C_Receptacle | footprints:CONN24_4056-03-A_GCT | J1 |
Similar boards
- 2 layers99.3 × 44.5 mm

- 4 layers70 × 40 mm

Tagger
northernpaws/lasernet-rev1
Retrofit Zigbee PCBs, firmware, and a custom Linux-based game controller for the lasertag.net Falcon system.
80 parts - 2 layers46 × 54 mm

Mini power
hnz1102/mini-power
Mini-Power is a small, portable DC power supply unit designed to provide a convenient and reliable source of adjustable voltage for your electronic devices and breadboard experiments.
52 parts3 - 2 layers122.2 × 122.8 mm

Dcpower
hnz1102/dcpower
DC Power Unit for Breadboard based on ESP32-S3 microcontroller and AP33772S USB Power Delivery (PD) Sink Controller.
115 parts1 - 2 layers65 × 50 mm

- 4 layers135.1 × 56.9 mm

- 4 layers70 × 70 mm

Windsensor
kristofkatzenberger/windsensor
This repository contains the design files for a portable wind sensor developed in 2025/26 at the University of Applied Sciences Technikum Wien. This project was completed as part of the Bachelor's Thesis:
128 partsMIT - 6 layers148.4 × 99.8 mm

Questions
How big is the USB C Simple Trig PCB?
It measures 45.9 × 48.7 mm and has 6 copper layers, 1.6 mm thick.
What parts does the USB C Simple Trig use?
49 parts, built around the AP33772SDKZ-13-FA01, BUK7880-55A/CUX and CG04874-8M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB C Simple Trig KiCad files?
From the ihsan-sa/USB-C-Trigger-Board repository on GitHub, at the commit this page was made from: the board is Gen1_trigger_boards/USB_C_Trig_Board_Simple_Multi_Layer/USB_C_Simple_Trig_Multi_Layer/USB_C_Simple_Trig.kicad_pcb and its schematic Gen1_trigger_boards/USB_C_Trig_Board_Simple/USB_C_Simple_Trig/MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB C Simple Trig design in my own project?
Its repository states no licence, so its author keeps all rights: ask ihsan-sa before reusing the design.