Skip to the content
2 layers31.8 × 27.8 mmAdafruit 0.96in 160x80 TFT Display, the printed circuit board in 3D

Adafruit 0.96in 160x80 TFT Display

ihmnelson/Turn-Timer

Turn timer file repo for Tabletop Gaming Club collab as part of Electronics Club @ UWB 2026.

Size
31.8 × 27.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
20
Pads
79
Tracks, vias
221, 28
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 May 2026
Updated
17 Aug 2026

Overview

Adafruit 0.96in 160x80 TFT Display is an open-source printed circuit board by ihmnelson, from the ihmnelson/Turn-Timer repository on GitHub. It is a 2-layer board of 31.8 × 27.8 mm with 29 parts on 20 nets, routed with 221 tracks and 28 vias.

It is built around the 74HC4050D, MIC5225-3.3YM5 and MMBT2222. Its parts include 4 resistors, 3 capacitors, 3 ICs and 1 transistor. It belongs with the lEDs and displays and radio and wireless boards of this library.

Main components

3

README

README.md

Turn Timer

A chess-clock-style turn timer for tabletop games, built for the Tabletop Gaming Club as part of Electronics Club @ UWB. Custom PCB (Arduino Nano + 0.96" 160×80 TFT + buzzer + 8 buttons) instead of a phone app or a pile of loose sand timers.

What it does

Each player gets a time bank (default 10 min) that only counts down on their turn. Supports 2-6 players, with a settings menu for per-player time, a periodic beep interval, a low-time warning, and mute. Players are eliminated when their bank hits zero; the display shows whose turn it is and how much time everyone has left.

Buttons: Esc, Select, Back, Next, Dec, Inc — used both for menu navigation and in-game turn advance/undo.

Hardware

  • Arduino Nano (socketed, not soldered direct)
  • Adafruit 0.96" 160×80 TFT (ST7735), SPI
  • Piezo buzzer
  • 8 tactile switches
  • KiCad schematic + PCB (TurnTimer.kicad_sch / .kicad_pcb), gerbers in production/

Firmware

TurnTimerArduinoCode/TurnTimerCodeNew/TurnTimerCodeNew.ino is the current version — Adafruit_GFX + Adafruit_ST7735 for the display. The top-level TurnTimerArduinoCode.ino is an earlier revision, kept for reference.

Repo layout

  • TurnTimer.kicad_* — main PCB project
  • 096TFTEagle/ — imported footprint/symbol source for the display
  • 3D Models/, CADExports/ — enclosure/board 3D files
  • production/ — gerbers and drill files for fab
  • TurnTimerArduinoCode/ — firmware
  • TurnTimer-backups/ — KiCad auto-backups (historical, not curated)

Parts

29
QtyValueFootprintReferences
210K0603-NOR2, R8
210µF0805-NOC1, C2
2FIDUCIAL_1MMFIDUCIAL_1MMFID1, FID2
2MOUNTINGHOLE2.5MOUNTINGHOLE_2.5_PLATEDU$9, U$10
1dummyfp8UNK_HOLE_8
1dummyfp1UNK_HOLE_1
1dummyfp2UNK_HOLE_2
1dummyfp5UNK_HOLE_5
1dummyfp7UNK_HOLE_7
1dummyfp9UNK_HOLE_9
1dummyfp0UNK_HOLE_0
1PCBFEAT-REV-040U$6
11X11_ROUNDJP1
1dummyfp4UNK_HOLE_4
1dummyfp3UNK_HOLE_3
1dummyfp6UNK_HOLE_6
10.1uF0805-NOC3
11K0603-NOR7
1220603-NOR5
174HC4050DSOIC16U3
1APX803SOT23IC5
1DISP_LCD_0.9IN_160X80TFT_0.96IN_160X80U$2
1MIC5225-3.3SOT23-5U2
1MICROSDADAFRUIT_3.5MMU$4
1MMBT2222SOT23-WIDEQ1

More from ihmnelson/Turn-Timer

1
  • 2 layers100 × 100 mmTurnTimer, the printed circuit board in 3D

    TurnTimer

    ihmnelson/Turn-Timer

    Turn timer file repo for Tabletop Gaming Club collab as part of Electronics Club @ UWB 2026.

    24 parts

Similar boards

  • 2 layers31 × 30.5 mmChristmas tree barrier, the printed circuit board in 3D

    Christmas tree barrier

    Petezah/roomba_wall_v2

    An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba

    17 parts32GPL-3.0
  • 2 layers76.3 × 105.1 mmENHP eleklekha, the printed circuit board in 3D

    ENHP eleklekha

    sebmorales/ENHP

    Experiments in Networked Hardware Performance

    49 parts9
  • 2 layers28 × 20 mmTMF882xBreakout, the printed circuit board in 3D

    TMF882xBreakout

    generationmake/TMF882xBreakout

    Breakout board for the ams TMF8820, TMF8821 and TMF8828 multi-zone time-of-flight sensors

    27 parts1
  • 2 layers28 × 20 mmTMF8801Breakout, the printed circuit board in 3D

    TMF8801Breakout

    generationmake/TMF8801Breakout

    Breakout board for the ams TMF8801 1D time-of-flight sensor

    27 parts1
  • 4 layers165 × 160 mmBig Fast Switch, the printed circuit board in 3D

    Big Fast Switch

    slugrustle/electronics

    Various electronics projects.

    136 parts1
  • 2 layers133 × 60 mmMax31856, the printed circuit board in 3D

    Max31856

    FirstLinkConsutlingService/UniversalKilnController

    A Hardware/Software project to control devices of the KILN persuasion ( temperature and cooking time manager)

    23 partsMIT
  • 2 layers25.4 × 34.3 mmAdafruit Ultimate GPS, the printed circuit board in 3D

    Adafruit Ultimate GPS

    johnscovell/ARIS

    Click here to purchase one from the Adafruit shop Other versions: Adafruit Ultimate GPS Breakout Adafruit Ultimate GPS FeatherWing Adafruit Ultimate GPS Logger Shield Adafruit Ultimate GPS HAT for Raspberry Pi Flora…

    22 parts

Questions

How big is the Adafruit 0.96in 160x80 TFT Display PCB?

It measures 31.8 × 27.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Adafruit 0.96in 160x80 TFT Display use?

29 parts, built around the 74HC4050D, MIC5225-3.3YM5 and MMBT2222. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Adafruit 0.96in 160x80 TFT Display KiCad files?

From the ihmnelson/Turn-Timer repository on GitHub, at the commit this page was made from: the board is 096TFTEagle/Adafruit 0.96in 160x80 TFT Display.kicad_pcb and its schematic 096TFTEagle/Adafruit 0.96in 160x80 TFT Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Adafruit 0.96in 160x80 TFT Display design in my own project?

Its repository states no licence, so its author keeps all rights: ask ihmnelson before reusing the design.