
Max31856 board
FirstLinkConsutlingService/UniversalKilnController
A Hardware/Software project to control devices of the KILN persuasion ( temperature and cooking time manager)

A Hardware/Software project to control devices of the KILN persuasion ( temperature and cooking time manager)
Max31856 is an open-source printed circuit board by FirstLinkConsutlingService, from the FirstLinkConsutlingService/UniversalKilnController repository on GitHub, published under the MIT licence. It is a 2-layer board of 133 × 60 mm with 23 parts on 19 nets, routed with 153 tracks and 11 vias.
It is built around the MAX31856 and MIC5225-3.3YM5. Its parts include 7 capacitors, 5 resistors, 3 diodes, 2 ICs and 1 crystal.
A Hardware/Software project to control devices of the KILN persuasion ( temperature and cooking time manager)
Test1
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.01uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3 |
| 3 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5 |
| 3 | 1N4148 | Diode_SMD:D_SOD-323 | D1, D2, D3 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C6 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C7 |
| 1 | 3.5mm term | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | X1 |
| 1 | HEADER-1X970MIL | Connector_PinHeader_1.00mm:PinHeader_1x09_P1.00mm_Vertical_SMD_Pin1Left | JP1 |
| 1 | MAX31856 | MAX31856MUD_:SOP65P640X110-14N | U1 |
| 1 | mic5225-3.3 | IC_Microchip Technology_MIC5225-3:Microchip_Technology-SOT23-5LD-PL-1-0-0-IPC_A | U2 |
The 19 most common of 23 parts.

FirstLinkConsutlingService/UniversalKilnController
A Hardware/Software project to control devices of the KILN persuasion ( temperature and cooking time manager)

FirstLinkConsutlingService/UniversalKilnController
A Hardware/Software project to control devices of the KILN persuasion ( temperature and cooking time manager)

FirstLinkConsutlingService/UniversalKilnController
A Hardware/Software project to control devices of the KILN persuasion ( temperature and cooking time manager)


Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba


generationmake/TMF882xBreakout
Breakout board for the ams TMF8820, TMF8821 and TMF8828 multi-zone time-of-flight sensors

generationmake/TMF8801Breakout
Breakout board for the ams TMF8801 1D time-of-flight sensor


ihmnelson/Turn-Timer
Turn timer file repo for Tabletop Gaming Club collab as part of Electronics Club @ UWB 2026.

johnscovell/ARIS
Click here to purchase one from the Adafruit shop Other versions: Adafruit Ultimate GPS Breakout Adafruit Ultimate GPS FeatherWing Adafruit Ultimate GPS Logger Shield Adafruit Ultimate GPS HAT for Raspberry Pi Flora…
It measures 133 × 60 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the MAX31856 and MIC5225-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FirstLinkConsutlingService/UniversalKilnController repository on GitHub, at the commit this page was made from: the board is max31856/ADAFRUIT/KICAD/max31856/max31856.kicad_pcb and its schematic max31856/ADAFRUIT/EAGLE/redux/verification/Adafruit MAX31856/Adafruit MAX31856.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).