2 layers75 × 75 mm
Pixel 6pin
idlehandsdev/pixopixel
PIXO Pixel is a 16 x 16 RGB LED display that runs off of an ESP32
282 parts65GPL-3.0
2 layers60 × 12 mm
PixoTester
idlehandsdev/pixopixel65PIXO Pixel is a 16 x 16 RGB LED display that runs off of an ESP32
- Size
- 60 × 12 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 5
- Pads
- 14
- Tracks, vias
- 30, 3
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jan 2018
- Updated
- 30 Oct 2018
Overview
PixoTester is an open-source printed circuit board by idlehandsdev, from the idlehandsdev/pixopixel repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60 × 12 mm with 4 parts on 5 nets, routed with 30 tracks and 3 vias.
Its parts include 2 connectors, 1 resistor and 1 diode. It belongs with the lEDs and displays boards of this library.
README
PCB/pixel/README.mdESPEverywhere
ESP8266 Special Make/100 Kickstarter Edition
Check out why this board exists here: https://www.youtube.com/watch?v=67Kh_ikb-ds
The ESP Everywhere was made to take part in the Kickstarter Make/100 Campaign You can get 1 of 100 boards assembled by me. Or you can Make your own. Kickstarter is here: https://www.kickstarter.com/projects/idlehandsdev/esp-everywhere-kickstarter-special-make-100
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | Resistors_SMD:R_0805 | R1 |
| 1 | Conn_01x04 | Connectors_JST_PH:Connectors_JST_S4B-PH-SM4-TB | J1 |
| 1 | LED | LEDs:LED-0603 | D1 |
| 1 | push_pins | idlehands_footprints:pixo_testpins | J2 |
Questions
How big is the PixoTester PCB?
It measures 60 × 12 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PixoTester use?
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PixoTester KiCad files?
From the idlehandsdev/pixopixel repository on GitHub, at the commit this page was made from: the board is pixoTester/pixoTester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PixoTester design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from idlehandsdev/pixopixel
3
Similar boards
- 2 layers18.5 × 26 mm
24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
4 parts1.7kApache-2.0 - 2 layers116 × 33 mm
- 2 layers19 × 18 mm
Daughter board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
4 parts915 - 2 layers24.8 × 24.8 mm
Nrf24 breakout
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
4 parts803MIT - 2 layers26 × 20 mm
Cap chain
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
4 parts744MIT - 2 layers34.7 × 20 mm
XG Station Power MSI
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
4 parts712CC-BY-4.0 - 2 layers20.3 × 24.5 mm
Jack power input
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
4 parts546MIT - 2 layers35.1 × 92.1 mm
SDEX2M2 MicroSD Express to M.2 NVMe Adapter for Switch 2 WIP
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
4 parts542GPL-3.0