2 layers44.5 × 46.9 mm
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k
2 layers220 × 40 mm
Os multitap
idlehandsdev/os_SuperMultitap6An open source version of the Nintendo Super Multitap
- Size
- 220 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 36
- Pads
- 131
- Tracks, vias
- 382, 57
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 May 2020
- Updated
- 28 May 2020
Overview
Os multitap is an open-source printed circuit board by idlehandsdev, from the idlehandsdev/os_SuperMultitap repository on GitHub. It is a 2-layer board of 220 × 40 mm with 31 parts on 36 nets, routed with 382 tracks and 57 vias.
It is built around the 74HCT126D. Its parts include 9 resistors, 6 capacitors, 5 connectors, 3 ICs and 1 diode. It belongs with the retro computing and games boards of this library.
Main components
1README
README.mdOpen Source Super Multitap
An open source version of the Nintendo Super Multitap. This allows you to plug in 4 more controllers to a SNES.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 6 | 0.1uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3, C4, C5, C6 |
| 4 | SNES_PLUG | project_footprints:SNES_Connector_H | J1, J2, J4, J5 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9 |
| 1 | 244 | Package_DIP:DIP-20_W7.62mm_LongPads | U2 |
| 1 | 4053 | Package_DIP:DIP-16_W7.62mm_LongPads | U3 |
| 1 | 5P_2P | project_footprints:4P2T | SW1 |
| 1 | 74HCT126 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | LED_Small | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D1 |
| 1 | LOGO | project_footprints:youtubesh | G*** |
| 1 | LOGO | project_footprints:SH_Logo | G*** |
| 1 | LOGO | project_footprints:SH_Logo_cu | G*** |
| 1 | LOGO | project_footprints:supermultitap_logo_cu | G*** |
| 1 | LOGO | project_footprints:supermultitap_logo | LOGO |
| 1 | LOGO | project_footprints:supermultitap_logo_mask | G*** |
| 1 | SNES_PLUG | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-7-2.54_1x07_P2.54mm_Horizontal | J3 |
Questions
How big is the Os multitap PCB?
It measures 220 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Os multitap use?
31 parts, built around the 74HCT126D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Os multitap KiCad files?
From the idlehandsdev/os_SuperMultitap repository on GitHub, at the commit this page was made from: the board is kicad/os_multitap.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Os multitap design in my own project?
Its repository states no licence, so its author keeps all rights: ask idlehandsdev before reusing the design.
Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm
MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm
CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm
Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm
- 2 layers103 × 55 mm
