

Hcc cherry
A SAMD21G18 based easy to solder module.
- Size
- 77 × 77 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 48
- Pads
- 139
- Tracks, vias
- 181, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 May 2018
- Updated
- 30 Nov 2018
Overview
Hcc cherry is an open-source printed circuit board by idlehandsdev-backup, from the idlehandsdev-backup/samd_hcc_mod repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 77 × 77 mm with 23 parts on 48 nets, routed with 181 tracks and 19 vias.
Its parts include 10 connectors, 9 ICs and 2 capacitors. It belongs with the SAM D and SAM boards of this library.
README
demo_boards/Cherry MX Board/README.mdSAMD21 Bridge Module
An easy to solder Arduino compatible surface mount module aimed to bridge the gap between using "off the shelf" microcontrollers to creating custom PCBs.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | APA102 | idlehands_libs:APA102-2020_AFSTYLE | U1, U2, U3, U5, U6, U7, U8, U9 |
| 2 | 1uF | Capacitors_SMD:C_0805 | C1, C2 |
| 1 | GS3 | idlehands_libs:3WAY_JUMPER_SMD | J10 |
| 1 | LOGO | idlehands_libs:MODZILLA_Logo | G*** |
| 1 | LOGO | idlehands_libs:SH_LOGO | G*** |
| 1 | SAMD21_MOD | idlehands_libs:SAMD_HCC_G_FOOT | U4 |
| 1 | SW1 | cherrymx:CHERRY_PCB_100H | J2 |
| 1 | SW2 | cherrymx:CHERRY_PCB_100H | J3 |
| 1 | SW3 | cherrymx:CHERRY_PCB_100H | J4 |
| 1 | SW4 | cherrymx:CHERRY_PCB_100H | J5 |
| 1 | SW5 | cherrymx:CHERRY_PCB_100H | J6 |
| 1 | SW6 | cherrymx:CHERRY_PCB_100H | J7 |
| 1 | SW7 | cherrymx:CHERRY_PCB_100H | J8 |
| 1 | SW8 | cherrymx:CHERRY_PCB_100H | J9 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Molex-105017-0001 | J1 |
More from idlehandsdev-backup/samd_hcc_mod
6- 2 layers18 × 22 mm

- 2 layers75 × 45 mm

- 2 layers53.3 × 57.6 mm

Hcc arduino
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
15 parts75GPL-3.0 - 2 layers60 × 55 mm

Programming jig
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
15 parts75GPL-3.0 - 2 layers18 × 7 mm

Lipo charge mod
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
9 parts75GPL-3.0 - 2 layers70 × 35 mm

Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the Hcc cherry PCB?
It measures 77 × 77 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hcc cherry use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hcc cherry KiCad files?
From the idlehandsdev-backup/samd_hcc_mod repository on GitHub, at the commit this page was made from: the board is demo_boards/Cherry MX Board/hcc_cherry.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hcc cherry design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).