

A SAMD21G18 based easy to solder module.
- Size
- 75 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 35
- Pads
- 109
- Tracks, vias
- 207, 33
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 May 2018
- Updated
- 30 Nov 2018
Overview
Hcc boy is an open-source printed circuit board by idlehandsdev-backup, from the idlehandsdev-backup/samd_hcc_mod repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 75 × 45 mm with 20 parts on 35 nets, routed with 207 tracks and 33 vias.
Its parts include 10 connectors, 2 ICs and 1 fuse. It belongs with the SAM D and SAM boards of this library.
README
demo_boards/Cherry MX Board/README.mdSAMD21 Bridge Module
An easy to solder Arduino compatible surface mount module aimed to bridge the gap between using "off the shelf" microcontrollers to creating custom PCBs.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | A | project_footprints:SW_SPST_PTS645 | J2 |
| 1 | B | project_footprints:SW_SPST_PTS645 | J3 |
| 1 | Battery_Cell | Connectors_JST_PH:Connectors_JST_S2B-PH-SM4-TB | BT1 |
| 1 | Fuse | Resistors_SMD:R_1206 | F1 |
| 1 | JOYSTICK | idlehands_footprints:JOYSTICK_MINI_2AXIS | RV1 |
| 1 | LOGO | idlehands_footprints:SH_LOGOcu | G*** |
| 1 | LOGO | project_footprints:MODBoy_Logo | G*** |
| 1 | LOGO | project_footprints:MODBoy_Logo_Mask | G*** |
| 1 | LOGO | idlehands_footprints:SH_LOGO | G*** |
| 1 | LOGO | idlehands_footprints:OSHLogo | G*** |
| 1 | OLED | Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mm | J11 |
| 1 | PWR | Buttons_Switches_SMD:SW_SPDT_PCM12 | J8 |
| 1 | SAMD21_MOD | idlehands_libs:SAMD_HCC_G_FOOT | U4 |
| 1 | Select | Buttons_Switches_SMD:SW_SPST_EVQPE1 | J7 |
| 1 | Selector | Buttons_Switches_SMD:SW_SPDT_PCM12 | J9 |
| 1 | Start | Buttons_Switches_SMD:SW_SPST_EVQPE1 | J6 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | X | project_footprints:SW_SPST_PTS645 | J4 |
| 1 | Y | project_footprints:SW_SPST_PTS645 | J5 |
| 1 | charge_mod | idlehands_libs:LIPO_CHARGE_MOD_FOOTPRINT | U1 |
More from idlehandsdev-backup/samd_hcc_mod
6- 2 layers18 × 22 mm

- 2 layers77 × 77 mm

- 2 layers53.3 × 57.6 mm

Hcc arduino
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
15 parts75GPL-3.0 - 2 layers60 × 55 mm

Programming jig
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
15 parts75GPL-3.0 - 2 layers18 × 7 mm

Lipo charge mod
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
9 parts75GPL-3.0 - 2 layers70 × 35 mm

Similar boards
- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm

FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Hcc boy PCB?
It measures 75 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hcc boy use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hcc boy KiCad files?
From the idlehandsdev-backup/samd_hcc_mod repository on GitHub, at the commit this page was made from: the board is demo_boards/hcc_boy/hcc_boy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hcc boy design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).