

A SAMD21G18 based easy to solder module.
- Size
- 70 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 32
- Pads
- 68
- Tracks, vias
- 70, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 May 2018
- Updated
- 30 Nov 2018
Overview
Cad flag is an open-source printed circuit board by idlehandsdev-backup, from the idlehandsdev-backup/samd_hcc_mod repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70 × 35 mm with 5 parts on 32 nets, routed with 70 tracks and 1 via.
Its parts include 3 connectors and 1 IC. It belongs with the SAM D and SAM boards of this library.
README
demo_boards/Cherry MX Board/README.mdSAMD21 Bridge Module
An easy to solder Arduino compatible surface mount module aimed to bridge the gap between using "off the shelf" microcontrollers to creating custom PCBs.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x12 | Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mm | J1, J3 |
| 1 | LOGO | idlehands_footprints:cad_flag | G*** |
| 1 | SAMD21_MOD | idlehands_libs:SAMD_HCC_G_FOOT | U1 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Molex-105017-0001 | J2 |
More from idlehandsdev-backup/samd_hcc_mod
6- 2 layers18 × 22 mm

- 2 layers77 × 77 mm

- 2 layers75 × 45 mm

- 2 layers53.3 × 57.6 mm

Hcc arduino
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
15 parts75GPL-3.0 - 2 layers60 × 55 mm

Programming jig
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
15 parts75GPL-3.0 - 2 layers18 × 7 mm

Lipo charge mod
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
9 parts75GPL-3.0
Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the Cad flag PCB?
It measures 70 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cad flag use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cad flag KiCad files?
From the idlehandsdev-backup/samd_hcc_mod repository on GitHub, at the commit this page was made from: the board is demo_boards/canadian_flag/cad_flag.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cad flag design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).