
NEW PCB ADCS
niki100jad/POQUITO_ADCS
ADCS for a PocketQube mission (Warning: Still untested!)

Arduino based PIC18F46Q24 development board
PICUINO is an open-source printed circuit board by icarofcb, from the icarofcb/PICUINO repository on GitHub. It is a 2-layer board of 68.9 × 53.6 mm with 45 parts on 61 nets, routed with 480 tracks and 248 vias.
It is built around the ARDUINO UNO R3, CDBU40-HF and 150060GS75000, with the B5819W, LSMCC201208T420RG and PTS810SJK250SMTRLFS among its other parts. Its parts include 17 capacitors, 8 resistors, 5 diodes, 3 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) and PIC boards of this library.
## PICUINO!
Arduino based PIC18F46Q24 development board
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C12, C19, C20, C47 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C15, C32, C37 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D2.5mm | TP1, TP2, TP3, TP4 |
| 3 | 220R | Resistor_SMD:R_0603_1608Metric | R1, R5, R43 |
| 3 | 220nF | Capacitor_SMD:C_0402_1005Metric | C16, C17, C18 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C29 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R44, R45 |
| 2 | CDBU40-HF | Diode_SMD:D_0603_1608Metric | D4, D7 |
| 2 | LED-GREEN | LED_SMD:LED_0603_1608Metric | D1, D5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1V8-pins | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D2 |
| 1 | Conn_PIC_ICSP_ICD | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LSMCC201208T420RG | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | PIC18F46Q24-I_PT | PIC18F46Q24-I_PT:QFP80P1200X1200X120-44N | IC1 |
| 1 | PTS810SJK250SMTRLFS | PTS810SJK250SMTR_LFS:PTS810SJK250SMTRLFS | S2 |
| 1 | TPS7A2618DRVR | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | IC5 |
| 1 | TPS7A2633DRVR | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | IC2 |
| 1 | USB4105-GF-A | USB4105-GF-A:GCT_USB4105-GF-A | J9 |
The 44 most common of 45 parts.

niki100jad/POQUITO_ADCS
ADCS for a PocketQube mission (Warning: Still untested!)



kartik2406/rp2040-ble
A PCB that uses RP2040 MCU and HM-BT4502 BLE passthrough module. This enables the RP2040 to communicated with other devices using Bluetooth. The bluetooth module is connected via UART(0)


oresat/oresat-kicad
All things KiCAD for OreSat; libraries, tools, settings, etc.

Andreuxxx1977/esp32-p4
An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.

open-ephys/ephys-test-board
General purpose, automated electrophysiology test board
It measures 68.9 × 53.6 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the ARDUINO UNO R3, CDBU40-HF, 150060GS75000 and B5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the icarofcb/PICUINO repository on GitHub, at the commit this page was made from: the board is PICUINO/PICUINO.kicad_pcb and its schematic PICUINO/PICUINO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask icarofcb before reusing the design.