ibsal/LERT1LERT will launch humans to space in 2 months, please give me 10 trillion dollars pls
TestStand is an open-source printed circuit board by ibsal, from the ibsal/LERT repository on GitHub. It is a 2-layer board of 105 × 142.5 mm with 116 parts on 117 nets, routed with 664 tracks and 70 vias.
It is built around the NRF24L01, TEENSY 4.1 and HX711, with the MAX31855KASA+T, VO615A-X001 and STP85NF55 among its other parts. Its parts include 37 capacitors, 23 resistors, 17 connectors, 12 ICs and 6 inductors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
LERT - Liquid Engine Rocket Team
LERT will launch humans to space in 2 months, please give me 10 trillion dollars pls
AD ASTRA PER IRAM
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C10, C14, C15, C23, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36 +2 |
| 12 | Screw_Terminal_01x03 | Library:CONN3_2601-1103_WAG | J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J17 |
| 9 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4, C5, C7, C8, C9, C11, C12 |
| 6 | 100 | Resistor_SMD:R_0805_2012Metric | R2, R3, R7, R8, R12, R13 |
| 6 | 8.2K | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R9, R11, R14 |
| 6 | LD1085V50 | Library:TO-220_STM | CR1, CR2, CR3, CR4, CR5, CR6 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R10, R15, R20 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 220 | Resistor_SMD:R_0805_2012Metric | R21, R22, R23 |
| 3 | 2601-1107 | Library:CONN7_2601-1107_WAG | J1, J2, J18 |
| 3 | 3.3uH | Inductor_SMD:L_0402_1005Metric | L1, L2, L3 |
| 3 | HX711 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U1, U2, U3 |
| 3 | MMBT4403-7-F | Library:SOT96P240X110-3N | Q1, Q2, Q3 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 3 | VO615A-X001 | Library:DIP-4_VO615A_VIS | U9, U10, U11 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R16, R17 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C17, C18 |
| 2 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | LP2980IM5X-3.3/NOPB | Library:MF05A_TEX | U5, U8 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 1.5pF | Capacitor_SMD:C_0805_2012Metric | C21 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C24 |
| 1 | 16Mhz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C25 |
| 1 | 1pF | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 3.9nH | Inductor_SMD:L_0402_1005Metric | L6 |
| 1 | 33nF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 4.7pF | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 8.2nH | Inductor_SMD:L_0402_1005Metric | L5 |
| 1 | CONN4_2606-1104/010-000_WAG | Library:2606-1104&slash_010-000 | J14 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J15 |
| 1 | MAX31855KASA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | NRF24L01 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U7 |
| 1 | STP85NF55 | Library:TO255P460X1020X2008-3P | IC1 |
| 1 | Teensy4.1 | Library:Teensy41 | U4 |
It measures 105 × 142.5 mm and has 2 copper layers, 1.6 mm thick.
116 parts, built around the NRF24L01, TEENSY 4.1, HX711 and MAX31855KASA+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ibsal/LERT repository on GitHub, at the commit this page was made from: the board is Circuits/TestStand/TestStand.kicad_pcb and its schematic Circuits/TestStand/TestStand.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ibsal before reusing the design.
Mew463/Project-l0ckcr4ck3r
I've always wanted to build a robot that actually decodes locks while maintaining a cool desk toy vibe! I am quite happy with the user-oriented design and doubles as a nice fidgety-toy-thing to play with.
Case-Rocket-Team/PayloadPrototypeBoard2021
Prototype Payload Board for the 2021 ESRA Payload using Parafoil Guidance. KiCad Project
sirihallqvist/PlantBreakoutBoard
Run the following commands to update and download dependencies.
Starman3787/flightSimBuildB738
Project to build parts of a flight simulator for a Boeing 737-800
daniel360kim/ember
Thrust vector control rocket via differentiable simulation and reinforcement learning.