2 layers173 × 85 mm
Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL
2 layers59 × 86 mm
Test1PIC
ibrkhalid11/PCB_FOLDERSUsually will just contain my personal projects starting Dec 2025.
- Size
- 59 × 86 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 29
- Pads
- 101
- Tracks, vias
- 107, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Dec 2025
- Updated
- 7 Dec 2025
Overview
Test1PIC is an open-source printed circuit board by ibrkhalid11, from the ibrkhalid11/PCB_FOLDERS repository on GitHub. It is a 2-layer board of 59 × 86 mm with 20 parts on 29 nets, routed with 107 tracks and 0 vias.
It is built around the L4931CZ33-AP. Its parts include 4 capacitors, 4 resistors, 4 connectors, 3 diodes and 2 ICs. It belongs with the PIC boards of this library.
Main components
1README
README.mdPCB_FOLDERS
Usually will just contain my personal projects starting Dec 2025.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4 |
| 3 | LED | LED_THT:LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D1, D2, D3 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | PB0, PB1, PB2 |
| 2 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J1, J2 |
| 1 | 0.1uF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C1 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 100nF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C3 |
| 1 | 10uF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C4 |
| 1 | 2.2uF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C2 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | L4931CZ33-AP | Package_TO_SOT_THT:TO-92 | U2 |
| 1 | PIC24 | Package_DIP:DIP-28_W7.62mm | U1 |
Questions
How big is the Test1PIC PCB?
It measures 59 × 86 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Test1PIC use?
20 parts, built around the L4931CZ33-AP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Test1PIC KiCad files?
From the ibrkhalid11/PCB_FOLDERS repository on GitHub, at the commit this page was made from: the board is Kicad/Test1PIC/Test1PIC.kicad_pcb and its schematic Kicad/Test1PIC/Test1PIC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Test1PIC design in my own project?
Its repository states no licence, so its author keeps all rights: ask ibrkhalid11 before reusing the design.
Similar boards
- 2 layers115 × 57.2 mm
- 2 layers100 × 66.1 mm
Mecparts RetroWiFiModem RetroWiFiModem
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
35 parts1 - 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k