Skip to the content
123

L4931CZ33-AP

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 20V 250mA 3.3V 50uV 600mV@(250mA) 600uA 73dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TO-92 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/L4931CZ33-AP
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-92
Pins
3
In stock
0 at JLCPCB (C2970373)
Used on
4 open-source boards

Overview

The L4931CZ33-AP is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-92 package with 3 pins. -40℃~+125℃@(Tj) 1 20V 250mA 3.3V 50uV 600mV@(250mA) 600uA 73dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TO-92 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_THT:TO-92L, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2970373). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

3IN1OUT2GND
Pinmap_Generic:Regulator_Linear_1OUT_2GND_3INFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_THT:TO-92LFrom KiCad's library

Pinout

3
The pins of the L4931CZ33-AP
PinNameType
1OUTPower out
2GNDPower in
3INPower in

Open-source boards using it

4
  • 2 layers173 × 85 mmAudio board, the printed circuit board in 3D

    Audio board

    EleonoreMizo/pedalevite

    Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.

    268 parts101WTFPL
  • 2 layers115 × 57.2 mmTeensyBoardZ80, the printed circuit board in 3D

    TeensyBoardZ80

    mecparts/TeensyBoardZ80

    A Teensy 4.0 emulated Z80 ZCPR3.3/ZSDOS computer.

    42 parts13MIT
  • 2 layers59 × 86 mmTest1PIC, the printed circuit board in 3D

    Test1PIC

    ibrkhalid11/PCB_FOLDERS

    Usually will just contain my personal projects starting Dec 2025.

    20 parts
  • 2 layers100 × 66.1 mmMecparts RetroWiFiModem RetroWiFiModem, the printed circuit board in 3D

    Mecparts RetroWiFiModem RetroWiFiModem

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    35 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the L4931CZ33-AP?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN and the footprint Package_TO_SOT_THT:TO-92L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L4931CZ33-AP?

TO-92, with 3 pins. Its footprint is drawn on this page.

Where is the L4931CZ33-AP datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the L4931CZ33-AP?

JLCPCB lists it as part C2970373, with 0 in stock; the sellers' links on this page open their listings.

What can replace the L4931CZ33-AP?

Parts like it in the library: the HT7333 by QNH, the DI78L3.3ZAB by DIOTEC, the AMS1117-3.3 by Advanced Monolithic Systems and the AMS1117-3.3 by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L4931CZ33-AP?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.