2 layers97 × 117 mm
2 layers97 × 97 mm
Socketsmd2
ibnuda/single27single key pcb.
- Size
- 97 × 97 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 255
- Nets
- 35
- Pads
- 630
- Tracks, vias
- 489, 50
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 May 2020
- Updated
- 19 Nov 2021
Overview
Socketsmd2 is an open-source printed circuit board by ibnuda, from the ibnuda/single repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 97 × 97 mm with 255 parts on 35 nets, routed with 489 tracks and 50 vias.
README
readme.mdSingle PCB
What?
Per switch pcb for handwiring build.
Why?
Just because.
Measurement
17mm x 14mm.
Intended Use
Use it to build keyboard that is generated from this generator.
Licence
GPLv3.
Parts
255| Qty | Value | Footprint | References |
|---|---|---|---|
| 125 | Conn_01x01 | footprints:wirepad | J10, J100, J102, J104, J106, J109, J110, J111, J112, J113, J114, J115, J116, J117, J118, J121 +109 |
| 40 | Val** | footprints:hole-four | Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref** +24 |
| 40 | Val** | footprints:hole-three | Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref** +24 |
| 25 | diode | footprints:diode | diode1, diode2, diode10, diode11, diode13, diode14, diode15, diode16, diode17, diode19, diode20, diode21, diode22, diode23, diode25, diode26 +9 |
| 25 | switch | footprints:1u-socket-minimal-flipped | switch1, switch2, switch10, switch11, switch13, switch14, switch15, switch16, switch17, switch19, switch20, switch21, switch22, switch23, switch25, switch26 +9 |
Questions
How big is the Socketsmd2 PCB?
It measures 97 × 97 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Socketsmd2 use?
255 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Socketsmd2 KiCad files?
From the ibnuda/single repository on GitHub, at the commit this page was made from: the board is socketsmd2/socketsmd2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Socketsmd2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from ibnuda/single
5- 2 layers97 × 117 mm
- 2 layers97 × 96 mm
- 2 layers97 × 96 mm
- 2 layers97 × 87 mm
Similar boards
- 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 2 layers102 × 86 mm
PoppyIO
Rahix/Poppy-Logic-Controller
A budget PLC-like board for controlling 24V DC equipment.
255 parts24 - 2 layers100 × 100 mm
BQ76pl455a
g-rahul/BQ76PL455A-EVM-Clone
This respository contains low cost design files for BQ76PL455A-EVM Clone.
255 parts5 - 2 layers581.8 × 275.2 mm
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure
255 parts4 - 2 layers101.6 × 90.1 mm
Ch32x035f7p6 micro devboard panelized
esehehelp/ch32x035f7p6-micro-devboard
micro devboard for ch32x035
255 parts1MIT - 2 layers172 × 140.5 mm
- 2 layers
- 2 layers323.9 × 115.5 mm
