2 layers390 × 93 mm
Pots
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
93 parts960Apache-2.0
2 layers334 × 58 mm
Corn tall
ibnuda/corn-tallwell.... pcb for long and thick keyboard.
- Size
- 334 × 58 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 62
- Pads
- 332
- Tracks, vias
- 331, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Aug 2020
- Updated
- 4 Aug 2020
Overview
Corn tall is an open-source printed circuit board by ibnuda, from the ibnuda/corn-tall repository on GitHub. It is a 2-layer board of 334 × 58 mm with 93 parts on 62 nets, routed with 331 tracks and 0 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdCorn Tall
ehehehe.
Screenshots
Front view.
Back view.
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | diode | tutankhamun:diode | diode1, diode2, diode10, diode11, diode12, diode13, diode14, diode15, diode16, diode17, diode18, diode19, diode20, diode21, diode22, diode24 +28 |
| 44 | switch | tutankhamun:1u-single | switch1, switch2, switch10, switch11, switch12, switch13, switch14, switch15, switch16, switch17, switch18, switch19, switch20, switch21, switch22, switch24 +28 |
| 2 | LOGO | tutankhamun:baldy_cheers | G***, G*** |
| 2 | LOGO | tutankhamun:baldy_uh_huh | G***, G*** |
| 1 | promicro | tutankhamun:promicro | U1 |
Questions
How big is the Corn tall PCB?
It measures 334 × 58 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Corn tall use?
93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Corn tall KiCad files?
From the ibnuda/corn-tall repository on GitHub, at the commit this page was made from: the board is corn-tall.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Corn tall design in my own project?
Its repository states no licence, so its author keeps all rights: ask ibnuda before reusing the design.
Similar boards
- 2 layers217.6 × 68.1 mm
Keezyboost40
ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware
93 parts202CC-BY-SA-4.0 - 2 layers100 × 100 mm
- 2 layers147 × 80 mm
Controller
voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.
93 parts108GPL-3.0 - 2 layers276 × 87.1 mm
- 2 layers30 × 46 mm
- 2 layers145.1 × 107.7 mm
Aurora l
Musab-Hassan/aurora_keyboard
A gorgeous split wireless ortholinear keyboard that you can build yourself.
93 parts64GPL-3.0 - 2 layers
Psoc5power2
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
93 parts59