4 layers179.6 × 161 mm
6 layers94 × 78 mm
Controller
Iari-Lab/OpenAcousticCamera26- Size
- 94 × 78 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 130
- Nets
- 310
- Pads
- 768
- Tracks, vias
- 1,626, 415
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Aug 2025
- Updated
- 2 Nov 2026
Overview
Controller is an open-source printed circuit board by Iari-Lab, from the Iari-Lab/OpenAcousticCamera repository on GitHub. It is a 6-layer board of 94 × 78 mm with 130 parts on 310 nets, routed with 1,626 tracks and 415 vias.
It is built around the SN74LVC2G07DBVR, AG9905-MTB and TXS0102DQMR, with the HSP051-4N10, 74AHC1G04SE and LDL212PV33R among its other parts. Its parts include 41 capacitors, 20 resistors, 12 ICs, 10 diodes and 9 connectors. It belongs with the FPGA and CPLD boards of this library.
Main components
12
SN74LVC2G07DBVR
SOT-23-6-40℃~+125℃ 1 1.65V~5.5V 10uA 2 2.2ns@3.3V,50pF 24mA 24mA 74LVC Schmitt trigger SOT-23-6 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversAG9905-MTB
-Short-Circuit Protection、Thermal Protection - Ethernet Modules ROHSSilver TelecomEthernet Modules
TXS0102DQMR
X2-SON-8(1.2x1.8)-40℃~+85℃ 1 1.65V~3.6V 2 2.3V~5.5V 24Mbps Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain SMBus、I2C、UART、Single bus X2-SON-8(1.2x1.8) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersHSP051-4N10
UQFN-10(1x1.9)-40℃~+150℃ 0.35pF 10V 10nA 3.6V 4.5V ESD Four channels IEC 61000-4-2 Unidirectional UQFN-10(1x1.9) ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
74AHC1G04SE
SOT-353-40℃~+125℃ 1 1 1.5V~3.85V 1.9V、2.9V、4.4V 1uA 2V~5.5V 500mV~1.65V 7.5ns@5V,50pF 74AHC 8mA 8mA Noise suppression function Schmitt trigger SOT-353 Inverters ROHSDiodes IncorporatedInverters
LDL212PV33R
DFN-6(2x2)-40℃~+125℃@(Tj) 1 1.2A 18V 250uA 3.3V 600mV@(1.2A) 60uVrms 87dB@(120Hz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable DFN-6(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
NVT4858HKZ
XQFN-16(1.8x2.6)-40℃~+85℃ 1 1.08V~1.95V 1.65V~3.6V 104Mbps 6 Bidirectional XQFN-16(1.8x2.6) Translators, Level Shifters ROHSNXP SemiconductorsTranslators, Level Shifters
PCM5101APW
TSSOP-20-25℃~+85℃ 0.8mA 1.8V~3.6V 2 32 Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose0.1UF 50V 5*11
插件,5x11mm1000hrs@105℃ 100nF 11mm 1A@100kHz 2mm 50V 5mm 插件,5x11mm Aluminum Electrolytic Capacitors - Leaded ROHSCXAluminum Electrolytic Capacitors - Leaded
M55-6002042R
SMD,P=1.27mm-55℃~+125℃ 1.27mm 1.27mm 1.2A 100V 2 20P 6.25mm Phosphor bronze Surface Mount,Vertical Tin Top SMD,P=1.27mm Female Headers ROHSHarwinFemale Headers
95278-101A12LF
SMD,P=2.54mm-65℃~+125℃ 12P 2 2.54mm 2.54mm 2.54mm 2x6P Black Phosphor bronze Pin Header Surface Mount,Vertical SMD,P=2.54mm Pin Headers ROHSAmphenolPin HeadersARJ-146
插件Ethernet Connectors / Modular Connectors (RJ45 RJ11)Abracon
README
README.mdOpenAcousticCamera
Parts
130| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | smd:C_0201_0603Metric | C3, C4, C15, C17, C18, C19, C24, C25, C26, C32, C33, C36, C38 |
| 10 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3, FID4, FID5, FID6, FID7, FID8, FID9, FID10 |
| 6 | 1 kOhms@100MHz | Inductor_SMD:L_0805_2012Metric | L3, L4, L5, L6, L7, L8 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C12, C21, C22, C23, C28, C31 |
| 5 | 470 | smd:R_0402_1005Metric | R3, R5, R12, R14, R16 |
| 4 | 0.1uF/50V | smd:C_0402_1005Metric | C5, C6, C14, C34 |
| 4 | 10nF/100V | Capacitor_SMD:C_0805_2012Metric | C7, C8, C9, C11 |
| 4 | 5.1k | smd:R_0201_0603Metric | R4, R11, R17, R18 |
| 4 | 75 | Resistor_SMD:R_0402_1005Metric | R13, R31, R32, R33 |
| 4 | MountingHole | MountingHole:MountingHole_3.7mm | H1, H2, H3, H4 |
| 4 | PESD5V0U2BM,315 | smd:PESD3V3L2UM315 | D5, D6, D7, D8 |
| 4 | TXS0102DQMR | smd:IC_TXS0102DQMR | U5, U9, U11, U12 |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric | R1, R7, R8 |
| 3 | 1nF/2kV | Capacitor_SMD:C_1206_3216Metric | C10, C43, C44 |
| 3 | 47k | smd:R_0201_0603Metric | R2, R6, R9 |
| 3 | LED | LED_SMD:LED_0402_1005Metric | D2, D9, D10 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C2, C40 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C27, C37 |
| 2 | 4.7nF | Capacitor_SMD:C_1206_3216Metric | C29, C30 |
| 2 | CON-SMA-EDGE-S | Conn:RFSOLUTIONS_CON-SMA-EDGE-S | J6, J8 |
| 2 | HSP051-4N10 | smd:UQFN10_1P04X1P95X0P4_STM | U3, U4 |
| 2 | M55-6002042R | Conn:HARWIN_M55-6002042R | JM1, JM2 |
| 2 | MYC-C7Z0XX_M1 | Conn:251779866 | M1, M2 |
| 2 | SBR05M100BLP-7 | smd:RECTIFIER_SBR05M100BLP-7 | D3, D4 |
| 1 | 0.01uF | smd:C_0201_0603Metric | C1 |
| 1 | 1.8uH | Inductor_SMD:L_Changjiang_FNR4020S | L2 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.9 | C20 |
| 1 | 10k | smd:R_0201_0603Metric | R10 |
| 1 | 120R@100MHz | Inductor_SMD:L_0603_1608Metric | FB2 |
| 1 | 1uF | smd:C_0201_0603Metric | C13 |
| 1 | 220R@100MHz | Inductor_SMD:L_0603_1608Metric | FB4 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 3V3_MIC | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | 473092651 | smd:0473093351 | J3 |
| 1 | 68pF | smd:C_0201_0603Metric | C35 |
| 1 | 744231091 | smd:WE-CNSW_08058 | L1 |
| 1 | 74AHC1G04 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U2 |
| 1 | 900@100MHz | smd:ACM4520_TDK | FL1 |
| 1 | 95278-101A12LF | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical_SMD | J7 |
| 1 | AG9905-MTB | power:AG9905MTB | M3 |
| 1 | ARJ-146 | Conn:ARJ146 | J4 |
| 1 | BCM857BS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q2 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J9 |
| 1 | DMG2305UX | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | FPGA reset | Conn:SW_SKRTLAE010 | SW1 |
| 1 | LDL212PV33R | smd:DFN_V33R_STM | U7 |
| 1 | LEFT | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | LOGO | smd:OSHW-Logo2_9.8x8mm_SilkScreen | G1 |
| 1 | MF-NSML400_12-2 | smd:FUSC3216X120N | F1 |
| 1 | NVT4858HKZ | smd:NVT4858_NXP | U1 |
| 1 | PCM5101A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U10 |
| 1 | RIGHT | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | SMAJ58A | Diode_SMD:D_SMA | D1 |
| 1 | SN74LVC2G07DBVR | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | TRS_LINE_OUT | Conn:C18594 | J5 |
| 1 | TVS1401DRBR | smd:VSON8_DRB_TEX | U8 |
| 1 | USB1125-GF-B_REVA | Conn:GCT_USB1125-GF-B_REVA | J1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J2 |
Questions
How big is the Controller PCB?
It measures 94 × 78 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Controller use?
130 parts, built around the SN74LVC2G07DBVR, AG9905-MTB, TXS0102DQMR and HSP051-4N10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the Iari-Lab/OpenAcousticCamera repository on GitHub, at the commit this page was made from: the board is pcb/controller_zynq_deprecated/controller.kicad_pcb and its schematic pcb/controller_zynq/AudioOutput.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Iari-Lab before reusing the design.
More from Iari-Lab/OpenAcousticCamera
1Similar boards
- 4 layers105 × 72 mm
- 4 layers100 × 100 mm
Hw alpha
Yexall/CPE-450.Capstone
Fall 24 - Winter 25 Cal Poly Capstone project by Haas Hooligans. This projects aims to build a machine monitoring system for the Cal Poly IME department.
171 parts - 6 layers91.8 × 139.8 mm
- 8 layers37 × 40.5 mm
Watch main
ben5049/Smart-Watch
This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.
206 partsApache-2.0 - 6 layers
Pc healthypi move sensor v9
Protocentral/healthypi-move-hw
Hardware files for the HealthyPi Move
124 parts160MIT - 4 layers29.3 × 30 mm
PlajTime
Kybernetika-SPSE/RP_Straka
Vývoj se odehrává v jiném repozitáři na naší organizaci a zveřejníme ho až bude ve stabilnějším stádiu.
100 parts - 4 layers184.1 × 132.9 mm
Board 2
Triksha-health/Hardware
Contains KiCAD files of all the PCB Boards for the Health Tracker System
170 parts - 2 layers34.6 × 28.4 mm
DVI adapter
openconcepts-ar/accel2d
This project aims to provide a graphics server system based on hardware accelerated graphics, and a easy way to develop the graphics primitives.
51 parts1