2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT
2 layers100 × 40 mm
Chainable halfdigit controller
I-Grebot/elec_chainable_halfdigit_controllerFiles inside 3dmodels folder must be copied into \share\kicad\modules\packages3d
- Size
- 100 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 36
- Pads
- 60
- Tracks, vias
- 41, 18
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Nov 2017
- Updated
- 19 May 2018
Overview
Chainable halfdigit controller is an open-source printed circuit board by I-Grebot, from the I-Grebot/elec_chainable_halfdigit_controller repository on GitHub. It is a 2-layer board of 100 × 40 mm with 12 parts on 36 nets, routed with 41 tracks and 18 vias.
It is built around the NRF24L01. Its parts include 4 connectors, 2 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdChainable half-digit controller
Requirements
Files inside 3d_models folder must be copied into <kicad dir>\share\kicad\modules\packages3d
Resources
Arduino Nano library downloaded from http://sylvain.fish.free.fr/kicad_lib/
NRF24L01 library downloaded from https://github.com/mysensors-kicad/mysensors_symbols
NRF24L01 footprint downloaded from https://github.com/mysensors-kicad/mysensors_radios.pretty
NRF24L01 3d model downloaded from https://github.com/mysensors-kicad/mysensors.3dshapes
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x01 | Connectors:Banana_Jack_1Pin | J3, J4 |
| 1 | Conn_01x06 | Socket_Strips:Socket_Strip_Angled_1x06_Pitch2.54mm | J2 |
| 1 | LOGO | lib_fp:logo_igrebot | G*** |
| 1 | NRF24L01 | lib_fp:NRF24L01 | U1 |
| 1 | SW_SPST | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | SW1 |
| 1 | USB_OTG | lib_fp:ST-USB-013A | J1 |
| 1 | arduino_nano | lib_fp:arduino_nano | U2 |
The 8 most common of 12 parts.
Questions
How big is the Chainable halfdigit controller PCB?
It measures 100 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Chainable halfdigit controller use?
12 parts, built around the NRF24L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Chainable halfdigit controller KiCad files?
From the I-Grebot/elec_chainable_halfdigit_controller repository on GitHub, at the commit this page was made from: the board is elec/chainable_halfdigit_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Chainable halfdigit controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask I-Grebot before reusing the design.
Similar boards
- 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16 - 2 layers38.6 × 90.3 mm
BioElectricalSensor
CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).
107 parts15MIT - 2 layers139 × 139 mm
Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
107 parts13GPL-3.0 - 2 layers50 × 50 mm
- 2 layers100 × 80 mm
- 2 layers100 × 40 mm
- 2 layers66.4 × 52.5 mm
