2 layers97.8 × 77.5 mm
DWP 2020
Hyperwiper/Hyperwiper
Data flow: audio source such as music player or smartphone connected to beat detector as embedded
26 parts3GPL-3.0
2 layers123.8 × 65.8 mm
Hyperwiper 2020 production prototype
Hyperwiper/Hyperwiper3Data flow: audio source such as music player or smartphone connected to beat detector as embedded
- Size
- 123.8 × 65.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 93
- Pads
- 224
- Tracks, vias
- 467, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220818)
- Created
- 24 Jun 2020
- Updated
- 22 Sep 2022
Overview
Hyperwiper 2020 production prototype is an open-source printed circuit board by Hyperwiper, from the Hyperwiper/Hyperwiper repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 123.8 × 65.8 mm with 47 parts on 93 nets, routed with 467 tracks and 10 vias.
It is built around the JSM1-12V-5 and IRF510PBF. Its parts include 11 diodes, 9 capacitors, 9 resistors, 5 transistors and 4 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2JSM1-12V-5
插件,16x22mm-40℃~+85℃ 10ms 10ms 12V 15A 16V@DC One set changeover: 1C (SPDT - changeover) Silver Alloy (Cd-Free) 插件,16x22mm Automotive Relays ROHSPanasonicAutomotive Relays
IRF510PBF
TO-220AB-55℃~+175℃ 1 N-channel 100V 15pF 180pF 43W 4V 5.6A 540mΩ@10V 8.3nC@10V 81pF N-Channel TO-220AB MOSFETs ROHSVishay IntertechnologyMOSFETs
README
README.mdhyperwiper
Basic idea is that most normal songs have a consistent (or at least slowly changing) rhythm that can be used as a “click track” for dancers, including robotic windshield wipers. By hiding the sound of wipers in the rhythm (a kind of masking), cabin signal-noise ratio can be enhanced. Many car drivers and riders enjoy listening to music while driving, and support of cross-modal, synaesthetic stimulus can enhance that experience, a kind of visual music.
Data flow: audio source such as music player or smartphone connected to beat detector as embedded
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4, D5, D6, D7, D8, D9, D10, D11 |
| 7 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1, C4, C5, C6, C7, C8, C9 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R4, R9 |
| 4 | JSM1-12V-5 | Hyperwiper 2020 production prototype all:SRA12VDCCL | RLY1, RLY2, RLY3, RLY4 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5, R7 |
| 3 | 2N2222 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q3, Q4 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2, C3 |
| 2 | Teensy4.0 | Hyperwiper 2020 production prototype all:Teensy40 | U1, U3 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q5 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | Beat LED | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D2 |
| 1 | Conn_01x05 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05505HBWC_1x05_P5.00mm_Horizontal | J1 |
| 1 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Motor LED | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | NSL-32 | OptoDevice:Luna_NSL-32 | U4 |
| 1 | OKI-78SR-5 | Converter_DCDC:Converter_DCDC_muRata_OKI-78SR_Horizontal | U2 |
| 1 | Power ON LED | LED_THT:LED_D5.0mm_Clear | D3 |
| 1 | R_POT_TRIM | Potentiometer_THT:Potentiometer_Piher_PT-10-V05_Vertical | RV1 |
| 1 | R_Pack08 | Package_DIP:DIP-16_W7.62mm_LongPads | RN1 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_NKK_G1xJP | SW1 |
| 1 | SW_Reed | Button_Switch_SMD:SW_SPST_REED_CT10-XXXX-G1 | SW2 |
More from Hyperwiper/Hyperwiper
3- 2 layers97.8 × 77.5 mm
Hyperwiper 2020 a
Hyperwiper/Hyperwiper
Data flow: audio source such as music player or smartphone connected to beat detector as embedded
18 parts3GPL-3.0 - 2 layers87.6 × 52.1 mm
Hyperwiper 2020 prototype
Hyperwiper/Hyperwiper
Data flow: audio source such as music player or smartphone connected to beat detector as embedded
2 parts3GPL-3.0
Similar boards
- 2 layers83.8 × 23.5 mm
- 2 layers176.4 × 133.2 mm
MainPCB v0.92
FilmNeverDie/Farbung
A open source project based on FilmNeverDie's CP800 film processing machine
207 parts25BSD-3-Clause - 2 layers100 × 77 mm
Dcc controller
sciguy16/dcc-controller-rs
Open source lightweight DCC controller written in Rust
88 parts9 - 6 layers243.8 × 243.8 mm
Raven
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack
231 parts87 - 2 layers100 × 35 mm
- 2 layers90 × 60 mm
Custom driver
Sussex-Neuroscience/ganzfeld-stimulator
1) Join 4 x 200mm beams to form a square, using the construction cubes in the corners. You need to make 2 of these for the top and bottom of the box.
27 partsGPL-3.0 - 2 layers30 × 61.3 mm
- 2 layers114 × 61.4 mm
Questions
How big is the Hyperwiper 2020 production prototype PCB?
It measures 123.8 × 65.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hyperwiper 2020 production prototype use?
47 parts, built around the JSM1-12V-5 and IRF510PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hyperwiper 2020 production prototype KiCad files?
From the Hyperwiper/Hyperwiper repository on GitHub, at the commit this page was made from: the board is hardware/Hyperwiper 2020 production prototype/Hyperwiper 2020 production prototype.kicad_pcb and its schematic hardware/DWP 2020/DWP 2020.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hyperwiper 2020 production prototype design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).