Skip to the content
123

IRF510PBF

Vishay IntertechnologyExtended

-55℃~+175℃ 1 N-channel 100V 15pF 180pF 43W 4V 5.6A 540mΩ@10V 8.3nC@10V 81pF N-Channel TO-220AB MOSFETs ROHS

Part id
vishay/IRF510PBF
Category
MOSFETs
Package
TO-220AB
Pins
3
In stock
4,220 at JLCPCB (C727603)
Used on
6 open-source boards

Overview

The IRF510PBF is a MOSFET made by Vishay Intertechnology in a TO-220AB package with 3 pins. -55℃~+175℃ 1 N-channel 100V 15pF 180pF 43W 4V 5.6A 540mΩ@10V 8.3nC@10V 81pF N-Channel TO-220AB MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2D_3S, from PCBKit's generic symbols) and its footprint (Source_Footprints:TO-220-3, from Digikey), ready for a KiCad board. 4,220 are in stock at JLCPCB (part C727603). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2D_3SFrom PCBKit's generic symbols

Footprint

123
Source_Footprints:TO-220-3From Digikey

Pinout

3
The pins of the IRF510PBF
PinNameType
1GInput
2DPassive
3SPassive

Open-source boards using it

6
  • 2 layers176.4 × 133.2 mmMainPCB v0.92, the printed circuit board in 3D

    MainPCB v0.92

    FilmNeverDie/Farbung

    A open source project based on FilmNeverDie's CP800 film processing machine

    207 parts25BSD-3-Clause
  • 2 layers100 × 77 mmDcc controller, the printed circuit board in 3D

    Dcc controller

    sciguy16/dcc-controller-rs

    Open source lightweight DCC controller written in Rust

    88 parts9
  • 2 layers123.8 × 65.8 mmHyperwiper 2020 production prototype, the printed circuit board in 3D

    Hyperwiper 2020 production prototype

    Hyperwiper/Hyperwiper

    Data flow: audio source such as music player or smartphone connected to beat detector as embedded

    47 parts3GPL-3.0
  • 6 layers243.8 × 243.8 mmRaven, the printed circuit board in 3D

    Raven

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    231 parts87
  • 2 layers100 × 35 mmQrp1, the printed circuit board in 3D

    Qrp1

    brucemack/kc1fsz-pa

    Various PA modules

    50 parts
  • 2 layers90 × 60 mmCustom driver, the printed circuit board in 3D

    Custom driver

    Sussex-Neuroscience/ganzfeld-stimulator

    1) Join 4 x 200mm beams to form a square, using the construction cubes in the corners. You need to make 2 of these for the top and bottom of the box.

    27 partsGPL-3.0

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the IRF510PBF?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2D_3S and the footprint Source_Footprints:TO-220-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IRF510PBF?

TO-220AB, with 3 pins. Its footprint is drawn on this page.

Where is the IRF510PBF datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the IRF510PBF?

JLCPCB lists it as part C727603, with 4,220 in stock; the sellers' links on this page open their listings.

What can replace the IRF510PBF?

Parts like it in the library: the IRF510PBF by Infineon Technologies and the IRF510PBF-VB by VBsemi Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IRF510PBF?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.