2 layers75.4 × 45.7 mm
Sharp 11Pin Breadboard
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
28 parts3MIT
2 layers110.7 × 62 mm
15pinproto
hwreverse/PokeconDebug3Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
- Size
- 110.7 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 18
- Pads
- 710
- Tracks, vias
- 103, 176
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Jan 2020
- Updated
- 25 Aug 2020
Overview
15pinproto is an open-source printed circuit board by hwreverse, from the hwreverse/PokeconDebug repository on GitHub, published under the MIT licence. It is a 2-layer board of 110.7 × 62 mm with 49 parts on 18 nets, routed with 103 tracks and 176 vias.
Its parts include 34 connectors, 6 resistors and 1 diode.
README
Casio/Casio PB-1000 Debug Unit/README.mdCasio PB-1000/2000C/AI-1000 System Bus Debug Board
SALEAE Logic Analyzer friendly (Ground pins with every Bus Pin, Groups of 2x4)
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | Conn_01x21_Male | Connector_PinHeader_2.54mm:PinHeader_1x21_P2.54mm_Vertical_nocrtyard+justholes | J1, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23 +16 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 2 | LOGO | Alexx:Pokekon_Soldermask | G***, G*** |
| 1 | 510R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | Conn_01x15_Male | Connector_PinHeader_1.27mm:PinHeader_1x15_P1.27mm_Vertical_nocrtyrd_noslk | J33 |
| 1 | LED ON | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SolidPad-Connector | Connector:SolidPad_4x4mm_2x2mmCore | J34 |
| 1 | VCCConnect | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | VCCLed | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
More from hwreverse/PokeconDebug
5- 2 layers45 × 53.3 mm
Casio PB-1000 Debug Unit
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
17 parts3MIT - 2 layers51.6 × 51.8 mm
Casio VX Debug Unit
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
17 parts3MIT - 2 layers19.3 × 29.8 mm
Sharp 11pin to 15pin Adapter
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
6 parts3MIT - 2 layers29.5 × 44 mm
Sharp PC-1600 MemCard
hwreverse/PokeconDebug
Breakout & Debug Boards for Vintage Pocket Computers (ポケコン) from Casio, Sharp,... and their Accessories
5 parts3MIT
Similar boards
- 2 layers173 × 122.5 mm
- 2 layers85.1 × 49.8 mm
- 2 layers50 × 90 mm
- 2 layers126.4 × 15.2 mm
- 2 layers43 × 92.3 mm
DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
49 parts261MIT - 2 layers58 × 110 mm
- 2 layers61 × 42.5 mm
- 2 layers31 × 38 mm
Questions
How big is the 15pinproto PCB?
It measures 110.7 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 15pinproto use?
49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 15pinproto KiCad files?
From the hwreverse/PokeconDebug repository on GitHub, at the commit this page was made from: the board is Sharp/15pinproto/15pinproto.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 15pinproto design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).