2 layers187.2 × 26.6 mm
2 layers45.7 × 38.1 mm
Pine
hutscape/pine7🌲 Indoor Infrared receiver and transmitter with temperature sensor 🎐
- Size
- 45.7 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 37
- Pads
- 179
- Tracks, vias
- 396, 51
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Jul 2019
- Updated
- 24 Dec 2024
Overview
Pine is an open-source printed circuit board by hutscape, from the hutscape/pine repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.7 × 38.1 mm with 50 parts on 37 nets, routed with 396 tracks and 51 vias.
Its parts include 14 resistors, 11 capacitors, 7 diodes, 4 ICs and 3 connectors. It belongs with the sensors and measurement boards of this library.
README
readme.mdPine
🌲 Indoor Infrared receiver and transmitter with temperature sensor 🎐
Visit hutscape.com/pine for more details.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 470R | Passives_0805:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R6, R7, R8, R10, R11 |
| 5 | 1uF | Passives_0805:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5, C6, C7, C10 |
| 4 | 10k | Passives_0805:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R9, R12, R13 |
| 4 | LED Yellow | Passives_0805:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5, D6, D7 |
| 4 | TestPoint_Probe | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4 |
| 3 | 100k | Passives_0805:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R4, R5 |
| 3 | 100nF | Passives_0805:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3 |
| 2 | 10uF | Passives_0805:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C11 |
| 2 | Open solder jumper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP4 |
| 2 | Schottky diode | Diode_SMD:D_SOD-123F | D1, D2 |
| 1 | 01x06 Male conn | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | 0R | Passives_0805:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14 |
| 1 | 10nF | Passives_0805:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9 |
| 1 | Battery connector | BatteryHolder_Takachi_SN3-3PC_3xAA:BatteryHolder_Takachi_SN3-3PC_3AA | J3 |
| 1 | IR LED Emitter | LED_THT:LED_D5.0mm_IRGrey | D3 |
| 1 | IR Receiver | OptoDevice:Vishay_MOLD-3Pin | U1 |
| 1 | LDO | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MCU | Package_QFP:TQFP-48_7x7mm_P0.5mm | U4 |
| 1 | NPN Transistor | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Push button | Push_Button:Tactile_pushbutton | SW2 |
| 1 | Switch | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | Temperature sensor | Package_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U3 |
| 1 | USB Micro type-B | USB_Micro-B_Horizontal:USB_Micro-B_Horizontal-U254-051T-4BH23-S2B | J1 |
| 1 | p-channel MOSFET | Package_TO_SOT_SMD:SOT-23 | Q1 |
The 49 most common of 50 parts.
Questions
How big is the Pine PCB?
It measures 45.7 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pine use?
50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pine KiCad files?
From the hutscape/pine repository on GitHub, at the commit this page was made from: the board is pcb/Pine.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pine design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers45.7 × 25.9 mm
- 2 layers21 × 31.5 mm
- 2 layers42 × 32.5 mm
Lipoboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
50 parts915 - 2 layers80 × 109.5 mm
NucDeck Right Controller PCB - Rev 1.2
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
50 parts561CERN-OHL-S-2.0 - 2 layers101 × 31.5 mm
- 2 layers123.9 × 94.4 mm
- 2 layers50 × 25 mm
Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223