2 layers25 × 61.5 mm
2 layers75 × 98.8 mm
Arduino MKR Badge
hulkco/Arduino_MKR_Badge3Arduino MKR Family Badge
- Size
- 75 × 98.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 34
- Pads
- 84
- Tracks, vias
- 283, 16
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2018
- Updated
- 10 Mar 2019
Overview
Arduino MKR Badge is an open-source printed circuit board by hulkco, from the hulkco/Arduino_MKR_Badge repository on GitHub. It is a 2-layer board of 75 × 98.8 mm with 37 parts on 34 nets, routed with 283 tracks and 16 vias.
Its parts include 15 ICs, 10 resistors, 10 diodes and 2 connectors. It belongs with the lEDs and displays boards of this library.
README
Prueba_Huella/README.mdOSH Park-compatible 2 Layer KiCad Template
This is a KiCad template to simplify making printed circuit boards.
It comes with all the design rules to meet the 2-layer OSH Park specs and stackup.
Instructions
- Open KiCad.
- Open Preferences > Configure Paths and note the value of 'KICAD_PTEMPLATES'.
- Download the template zip and extract into the location of 'KICAD_PTEMPLATES'.
- In KiCad, open File > New Project > New Project from Template.
- Select the location of your new project. The name of the folder will be the name of your project.
- The templates with folders in the 'KICAD_PTEMPLATES' are listed under 'Portable Templates" tab.
- Select the template and click 'OK'.
- Your project now exists, so you can open EESchema and PCBNew and design as usual.
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LED_ALT | ArduinoBadge:SunLed_PLCC_Reverse-2 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 10 | R | Resistor_SMD:R_1206_3216Metric_Pad1.39x1.80mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 2 | CONN_01X08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Left | J1, J2 |
| 1 | 2019.All.Mask.02 | 004:2019.2.All.B.Mask | U1 |
| 1 | 2019.All.Mask.03 | 004:2019.2.All | U2 |
| 1 | Arduino.SilkS | ArduinoBadge:Arduino.SilkS | U3 |
| 1 | Edge.Back.Only.SilkS.02 | ArduinoBadge:Edge.Back.Only.SilkS.02 | U4 |
| 1 | Edge.Only.SilkS.02 | ArduinoBadge:Edge.Only.SilkS.02 | U5 |
| 1 | Fig.04.Cu.Mask | ArduinoBadge:Fig.04.Cu.Mask | U6 |
| 1 | Fig.05.Cu.Mask | ArduinoBadge:Fig.05.Cu.Mask | U7 |
| 1 | Fig.06.Cu.Mask | ArduinoBadge:Fig.06.Cu.Mask | U8 |
| 1 | Holder.B.Cu.Mask.01 | ArduinoBadge:Holder.B.Cu.Mask.01 | U9 |
| 1 | Holder.Cu.Mask.01 | ArduinoBadge:Holder.Cu.Mask.01 | U10 |
| 1 | MKR_Family | ArduinoBadge:MKR_Family_SMD | U15 |
| 1 | logo.B.Mask.Der.01 | ArduinoBadge:logo.B.Mask.Der.01 | U11 |
| 1 | logo.B.Mask.Izq.01 | ArduinoBadge:logo.B.Mask.Izq.01 | U12 |
| 1 | logo.F.Mask.Der.01 | ArduinoBadge:logo.F.Mask.Der.01 | U13 |
| 1 | logo.F.Mask.Izq.01 | ArduinoBadge:logo.F.Mask.Izq.01 | U14 |
More from hulkco/Arduino_MKR_Badge
3- 2 layers50.8 × 50.8 mm
- 2 layers62.3 × 53.9 mm
Similar boards
- 2 layers40 × 34 mm
- 2 layers53.9 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
37 parts1kGPL-3.0 - 2 layers52 × 51.8 mm
Esp32-homeassistant rf bridge
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
37 parts915 - 2 layers87.8 × 59.8 mm
FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers65 × 28 mm
BMS Cell Module
stuartpittaway/diyBMS
Do it yourself battery management system for Lithium ion battery packs/cells
37 parts676GPL-3.0 - 2 layers48 × 32 mm
FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
37 parts575GPL-2.0 - 2 layers38.1 × 153.7 mm
- 2 layers47.8 × 27.4 mm
Vsf stm32h7b0
vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
37 parts341Apache-2.0
Questions
How big is the Arduino MKR Badge PCB?
It measures 75 × 98.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino MKR Badge use?
37 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino MKR Badge KiCad files?
From the hulkco/Arduino_MKR_Badge repository on GitHub, at the commit this page was made from: the board is 004/001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino MKR Badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask hulkco before reusing the design.