2 layers35.6 × 66.5 mm
2 layers86.5 × 93.6 mm
HG Badge master
hulkco/Varios2Varios
- Size
- 86.5 × 93.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 17
- Pads
- 73
- Tracks, vias
- 0, 1
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2018
- Updated
- 12 Feb 2022
Overview
HG Badge master is an open-source printed circuit board by hulkco, from the hulkco/Varios repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 86.5 × 93.6 mm with 24 parts on 17 nets.
It is built around the ATTINY85-20SU, WS2812B and MBRA140. Its parts include 9 diodes, 5 connectors, 3 capacitors, 2 resistors and 2 ICs. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
MBRA140
SMA(DO-214AC)-55℃~+125℃ 1 Independent 1A 30A 40V 500uA@40V 550mV@1A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdVarios
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | WS2812B | PCBWay:WS2812B | LED1, LED2, LED3, LED4, LED5, LED6, LED7 |
| 2 | 4.7uF | PCBWay:C_1206_HandSoldering | C1, C2 |
| 1 | 1M Ohms | PCBWay:R_1206_HandSoldering | R2 |
| 1 | 1k | PCBWay:R_1206_HandSoldering | R1 |
| 1 | 22nF | PCBWay:C_1206_HandSoldering | C3 |
| 1 | ATTINY85-20SU | PCBWay:SOIJ-8_5.3x5.3mm_Pitch1.27mm | U2 |
| 1 | CONN_01X02 | PCBWay:Molex_PicoBlade_53261-0271_02x1.25mm_Angled | J1 |
| 1 | CONN_01X02 | PCBWay:Pin_Header_Straight_1x02_Pitch2.54mm_SMD_Pin1Left | J5 |
| 1 | CONN_01X03 | PCBWay:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Left | J2 |
| 1 | CONN_01X03 | PCBWay:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Right | J3 |
| 1 | CONN_02X03 | PCBWay:Pin_Header_Straight_2x03_Pitch2.54mm_SMD | J4 |
| 1 | HG_CAPSENSE | PCBWay:H_CapSense | CAP1 |
| 1 | HG_Edge_Cuts | PCBWay:HG_100_Edge_Cuts | Edge1 |
| 1 | HG_SilKs | PCBWay:Corona_SilKs | SilKs1 |
| 1 | LM340MP-5.0/NOPB | PCBWay:SOT-223-3Lead_TabPin2 | U1 |
| 1 | MBRA140 | PCBWay:DIODE-SMA | D1 |
| 1 | ON | PCBWay:LED_1206_HandSoldering | D2 |
More from hulkco/Varios
12- 2 layers38.6 × 69.5 mm
- 16 layers88.3 × 64.5 mm
- 2 layers43.6 × 41.1 mm
- 2 layers108 × 67.2 mm
- 2 layers35.6 × 66.5 mm
- 2 layers50 × 50 mm
- 2 layers
- 2 layers68.6 × 53.3 mm
- 2 layers24 × 22 mm
- 2 layers85.7 × 92.7 mm
- 2 layers40.6 × 38.1 mm
Similar boards
- 2 layers73.1 × 87.8 mm
- 2 layers
- 2 layers49.9 × 39.4 mm
ATM90E26 Featherwing
whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD
59 parts4 - 2 layers68.6 × 53.3 mm
- 2 layers91 × 154.9 mm
- 2 layers
- 2 layers45 × 135 mm
- 2 layers50.3 × 42.7 mm
Questions
How big is the HG Badge master PCB?
It measures 86.5 × 93.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HG Badge master use?
24 parts, built around the ATTINY85-20SU, WS2812B and MBRA140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HG Badge master KiCad files?
From the hulkco/Varios repository on GitHub, at the commit this page was made from: the board is HG_Badge-master/KiCad/001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HG Badge master design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).