

Escorni Badge
Varios
- Size
- 98.6 × 96.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 18
- Pads
- 73
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2018
- Updated
- 12 Feb 2022
Overview
Escorni Badge is an open-source printed circuit board by hulkco, from the hulkco/Varios repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 98.6 × 96.3 mm with 25 parts on 18 nets.
It is built around the ATTINY85-20SU, WS2812B and MBRA140. Its parts include 7 diodes, 5 connectors, 3 capacitors, 2 resistors and 2 ICs. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedMBRA140
SMA(DO-214AC)-55℃~+125℃ 1 Independent 1A 30A 40V 500uA@40V 550mV@1A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdVarios
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | WS2812B | 001:WS2812B | LED1, LED2, LED3, LED4, LED5 |
| 2 | 4.7uF | 001:C_1206_HandSoldering | C1, C2 |
| 1 | 1Mohm | 001:R_1206_HandSoldering | R1 |
| 1 | 1k | 001:R_1206_HandSoldering | R2 |
| 1 | 22nF | 001:C_1206_HandSoldering | C3 |
| 1 | ATTINY85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | CONN_01X02 | 001:Pin_Header_Straight_1x02_Pitch2.54mm_SMD_Pin1Left | J1 |
| 1 | CONN_01X02 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | CONN_01X03 | 001:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Left | J4 |
| 1 | CONN_01X03 | 001:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Right | J5 |
| 1 | CONN_02X03 | 001:Pin_Header_Straight_2x03_Pitch2.54mm_SMD | J3 |
| 1 | Escorni_Art | 001:escorni-badge-new_02_100mm | SilKs1 |
| 1 | Escorni_Touch | 001:escorni-Touch_02_100mm | CAP1 |
| 1 | G*** | 001:FirmaCuMask | svg2mod |
| 1 | LM340MP-5.0/NOPB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MBRA140 | 001:DIODE-SMA | D1 |
| 1 | MSK12C02_SWITCH-SLIDE-SPDT | 001:MSK12C02 | S1 |
| 1 | MountingHole_5mm_Badge | 001:MountingHole_3.5mm_Pad | MountinHoleBagde |
| 1 | ON | 001:LED_1206_HandSoldering | D2 |
The 24 most common of 25 parts.
More from hulkco/Varios
12- 2 layers35.6 × 66.5 mm

- 2 layers38.6 × 69.5 mm

- 16 layers88.3 × 64.5 mm

- 2 layers43.6 × 41.1 mm

- 2 layers108 × 67.2 mm

- 2 layers35.6 × 66.5 mm

- 2 layers50 × 50 mm

- 2 layers

- 2 layers68.6 × 53.3 mm

- 2 layers24 × 22 mm

- 2 layers85.7 × 92.7 mm

- 2 layers40.6 × 38.1 mm

Similar boards
- 2 layers73.1 × 87.8 mm

- 2 layers

- 2 layers49.9 × 39.4 mm

ATM90E26 Featherwing
whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD
59 parts4 - 2 layers68.6 × 53.3 mm

- 2 layers91 × 154.9 mm

- 2 layers

- 2 layers45 × 135 mm

- 2 layers50.3 × 42.7 mm

Questions
How big is the Escorni Badge PCB?
It measures 98.6 × 96.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Escorni Badge use?
25 parts, built around the ATTINY85-20SU, WS2812B and MBRA140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Escorni Badge KiCad files?
From the hulkco/Varios repository on GitHub, at the commit this page was made from: the board is Escorni_Badge/001-85/001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Escorni Badge design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).