

Upload "Oshwi" Badge for OshwDem 2017 a Coruña
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 17
- Pads
- 66
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jul 2017
- Updated
- 18 Mar 2024
Overview
SMD is an open-source printed circuit board by hulkco, from the hulkco/oshwi repository on GitHub. It is a 2-layer board with 20 parts on 17 nets.
It is built around the ATTINY85-20SU, WS2812B-2020 and MBRA140. Its parts include 5 connectors, 5 inductors, 3 capacitors, 2 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)WS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)MBRA140
SMA(DO-214AC)-55℃~+125℃ 1 Independent 1A 30A 40V 500uA@40V 550mV@1A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdOshwi Badge
This badge is still under development, there are still errors or omissions in the circuit, help is welcome
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | WS2812B-2020 | LED_SMD:WS2812_2020 | L1, L2, L3, L4, L5 |
| 3 | CONN_01X03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical_SMD_Pin1Left | J1, J2, J4 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 1 | 22nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | CAPSENSE_CIRCLE | SMD:CAPSENSE-CIRCLE2-D10MM | CAP1 |
| 1 | CONN_01X02 | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J5 |
| 1 | CONN_02X03 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical_SMD | J3 |
| 1 | LM340MP-5.0/NOPB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MBRA140 | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | ON | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
More from hulkco/oshwi
11- 2 layers61.5 × 25 mm

- 2 layers25 × 61.5 mm

- 2 layers74.7 × 96.8 mm

- 2 layers74.7 × 96.8 mm

- 2 layers74.7 × 96.8 mm

- 2 layers74.7 × 96.8 mm

- 2 layers97.6 × 96.8 mm

- 2 layers83.9 × 108.8 mm

- 2 layers83.9 × 108.8 mm

- 2 layers11.4 × 12.7 mm

- 2 layers50.8 × 22.9 mm

Similar boards
- 2 layers73.1 × 87.8 mm

- 2 layers98.6 × 96.3 mm

- 2 layers49.9 × 39.4 mm

ATM90E26 Featherwing
whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD
59 parts4 - 2 layers68.6 × 53.3 mm

- 2 layers91 × 154.9 mm

- 2 layers

- 2 layers45 × 135 mm

- 2 layers50.3 × 42.7 mm

Questions
What parts does the SMD use?
20 parts, built around the ATTINY85-20SU, WS2812B-2020 and MBRA140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SMD KiCad files?
From the hulkco/oshwi repository on GitHub, at the commit this page was made from: the board is 2019/mini/SMD/SMD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SMD design in my own project?
Its repository states no licence, so its author keeps all rights: ask hulkco before reusing the design.