Hugoyhu/1284P-DipDuino-Clone1Small form factor 1284P Development Board inspired by AtomSoftTech's DipDuino. 1284P Schematic from @dcelectr and USB bridge circuit from SparkFun.
ATmega1284P is an open-source printed circuit board by Hugoyhu, from the Hugoyhu/1284P-DipDuino-Clone repository on GitHub. It is a 2-layer board of 68.4 × 18.9 mm with 29 parts on 59 nets, routed with 369 tracks and 29 vias.
It is built around the ATMEGA1284P-AU and CH340C. Its parts include 8 capacitors, 8 resistors, 6 connectors, 3 diodes and 2 ICs. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Small form factor 1284P Development Board inspired by AtomSoftTech's DipDuino(https://www.tindie.com/products/atomsoft/dipduino-12/).
Schematic was based off Dcelectr's 1284P Schematic(https://github.com/dcelectr/ATmega1284P_Board), and USB bridge schematic from Sparkfun(https://www.sparkfun.com/products/15096)
Designed with KiCAD EDA.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5, R6, R7, R8 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C8 |
| 4 | Conn_01x09 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J3, J4, J6, J7 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 16MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | ATmega1284P-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | USB-THT-IO:GCT_USB4085-GF-A_REVA | J2 |
It measures 68.4 × 18.9 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ATMEGA1284P-AU and CH340C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Hugoyhu/1284P-DipDuino-Clone repository on GitHub, at the commit this page was made from: the board is ATmega1284P.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Hugoyhu before reusing the design.
iSebass/MicrocontroladoresTeoria-Practicas
Este repositorio ha sido creado como un recurso de apoyo para el curso de Microcontroladores impartido en la Universidad del Valle. En este espacio colaboraremos con el Dr. en Ingeniería Sergio Arenas y el Ing.
jp112sdl/HB-Dis-EP-42BW
4.2" ePaper Display mit 10 Tasterkanälen für Homematic
FUEL4EP/HomeAutomation
Home Automation repository of FUEL4EP
NarodniySputnik/Gladiolus-1
Gladiolus-1 - автономный модуль для приема и передачи изображений в формате SSTV (Slow Scan TeleVision) на малом космическом аппарате (МКА) формата CubeSat
UniversalScientificTechnologies/SPACEDOS02
Solid-state PIN diode dosimeter for manned spacecraft. Liulin detector replacement.
mlab-modules/BATDATUNIT01
Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.
pandemiaplan/OP-Vent
A Simple, Open-Source Ventilator using a Proportional Solenoid Valve