

Main 4.2
My projects
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 126
- Pads
- 395
- Tracks, vias
- 494, 155
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Aug 2023
- Updated
- 9 Jan 2025
Overview
Main 4.2 is an open-source printed circuit board by hughminhphan, from the hughminhphan/PROJECTS repository on GitHub. It is a 4-layer board of 100 × 100 mm with 89 parts on 126 nets, routed with 494 tracks and 155 vias.
It is built around the DRV8873HPWPRQ1 and DEV-16771. Its parts include 30 resistors, 27 capacitors, 13 connectors, 10 ICs and 3 switches.
Main components
2Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C6, C8, C11, C13, C16, C18 |
| 8 | 363R | Resistor_SMD:R_0805_2012Metric | R2, R5, R7, R10, R12, R15, R17, R20 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C10, C15, C20, C24 |
| 5 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C4, C9, C14, C19, C21 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C22, C23, C26, C27, C29 |
| 4 | 0R | Resistor_SMD:R_0805_2012Metric | R3, R8, R13, R18 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R32, R33, R34, R35 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R11, R16, R21 |
| 4 | 3M | Resistor_SMD:R_0805_2012Metric | R4, R9, R14, R19 |
| 4 | 47nF | Capacitor_SMD:C_0402_1005Metric | C2, C7, C12, C17 |
| 4 | 4K7 | Resistor_SMD:R_0805_2012Metric | R27, R28, R29, R30 |
| 4 | DRV8873HPWPR | DRV8873HPWPR:PWP24_TEX | U1, U2, U3, U4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | SPST | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2, SW3 |
| 1 | 4S Battery | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J10 |
| 1 | 5V PI | Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J14 |
| 1 | 95R | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | Adafruit_BNO055_STEMMA_QT | 2.3 PCBs:Adafruit IMU BNO055 | U9 |
| 1 | Batt Bal | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J13 |
| 1 | Battery Buzzer | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J12 |
| 1 | Bluetooth_Module_(HC-05) | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U10 |
| 1 | DEV-16771 | DEV-16771:MODULE_DEV-16771 | U12 |
| 1 | KICKER | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | Line | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J15 |
| 1 | M1 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | M2 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | M3 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | M4 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | M5 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Power Switch | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J11 |
| 1 | Q_Photo_NPN | LED_THT:LED_D3.0mm | Q1 |
| 1 | R | Resistor_SMD:R_1210_3225Metric | R1 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J16 |
| 1 | ~ | 2.3 PCBs:5V, 5.5A Step-Down Voltage Regulator D36V50F5 | U8 |
| 1 | ~ | 2.3 PCBs:DC-DC Multi-output Buck Converter | U6 |
| 1 | ~ | 2.3 PCBs:Pololu 3.3V, 500mA Step-Down Voltage Regulator D24V5F3 | U7 |
More from hughminhphan/PROJECTS
12- 2 layers68 × 23.4 mm

- 4 layers133.1 × 97.6 mm

- 2 layers

- 2 layers

- 2 layers135 × 95.3 mm

- 4 layers142.5 × 86.6 mm

- 2 layers

- 2 layers

- 2 layers99 × 99 mm

- 2 layers89 × 79 mm

- 2 layers206 × 197.4 mm

- 2 layers169 × 150 mm

Similar boards
- 4 layers96 × 80 mm

- 2 layers70 × 59.7 mm

MyMachine LED cap
BrnoMarsRover/myMachine-LED-cap
Repository for my Machine LED Cap project, including software, PCBs, and documentation.
58 partsMIT - 2 layers120 × 94 mm

Aurelia robotics PCB
DanielCusi/MoonJelly-robotics-PCB
Robotics PCB designed for Eurobot used by Wolvineers.
270 partsCERN-OHL-W-2.0 - 4 layers87.7 × 52 mm

FoxFobz Reciever
edodso2/FoxFobz
A BLE key fob + receiver that adds keyless lock/unlock to classic cars, starting with the 1988 Fox-body Mustang.
69 parts - 2 layers80 × 145 mm

- 4 layers93 × 85 mm

TasaruV0.0.1
ThatguyCplus/throttleECU
STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module
158 parts1 - 2 layers87.6 × 81.5 mm

- 4 layers96.5 × 81.3 mm

Hexapod PCB KiCad Project
Aecert-Robotics/Hexapod
A hexapod powered by Arduino using hobby servos
48 parts15GPL-3.0
Questions
How big is the Main 4.2 PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Main 4.2 use?
89 parts, built around the DRV8873HPWPRQ1 and DEV-16771. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main 4.2 KiCad files?
From the hughminhphan/PROJECTS repository on GitHub, at the commit this page was made from: the board is Goku _ Vegeta/4.2/Main 4.2/Main 4.2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main 4.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hughminhphan before reusing the design.