2 layers68 × 23.4 mm
2 layers61 × 36.8 mm
Kicker
hughminhphan/PROJECTSMy projects
- Size
- 61 × 36.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 8
- Pads
- 39
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Aug 2023
- Updated
- 9 Jan 2025
Overview
Kicker is an open-source printed circuit board by hughminhphan, from the hughminhphan/PROJECTS repository on GitHub. It is a 2-layer board of 61 × 36.8 mm with 18 parts on 8 nets.
It is built around the G5LE-14 DC12, B3B-XH-A(LF)(SN) and B560C-13-F-MS. Its parts include 4 capacitors, 4 resistors, 3 connectors and 1 diode.
Main components
3
G5LE-14 DC12
插件,22.5x16.5mm-25℃~+85℃ 100mΩ 10A 10ms 12V 30V@DC、250V@AC 5ms 8A@30VDC、10A@120VAC One set changeover: 1C (SPDT - changeover) Silver Alloy (Cd-Free) 插件,22.5x16.5mm Power Relays ROHSOmronPower Relays
B3B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x3P 2.5mm 250V 3 3A 3P 5.75mm 7mm 9.9mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
B560C-13-F-MS
SMC-65℃~+125℃ 1 Independent 175A 500uA@60V 5A 60V 850mV@5A SMC Schottky Diodes ROHSMSKSEMISchottky Diodes
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2, C3, C4 |
| 4 | 12k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | G5LE-14_DC12 | digikey-footprints:Relay_THT_G5LE-14 | RLY1, RLY2 |
| 1 | B3B-XH-A_LF__SN_ | digikey-footprints:PinHeader_1x3_P2.5mm_Drill1.1mm | J3 |
| 1 | B560C-13-F | digikey-footprints:DO-214AB | D1 |
| 1 | IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
More from hughminhphan/PROJECTS
12- 4 layers133.1 × 97.6 mm
- 2 layers
- 2 layers
- 2 layers135 × 95.3 mm
- 4 layers142.5 × 86.6 mm
- 2 layers
- 2 layers
- 2 layers99 × 99 mm
- 2 layers89 × 79 mm
- 2 layers206 × 197.4 mm
- 2 layers169 × 150 mm
Similar boards
- 2 layers250.6 × 192.6 mm
- 2 layers84.4 × 80 mm
Relay control
Awrelo/4-Channel-Relay-Control-Circuit
12V relay driver circuit, pcb and schematics
34 parts - 2 layers118.7 × 66 mm
Vacuum gauge
gbochev/vacuum-gauge
Simple Arduino-based vacuum gauge for Pirani and Thermocouple sensor types
36 partsGPL-3.0 - 6 layers80.9 × 63 mm
- 2 layers65 × 56 mm
PiGarage
bryce-builds/PiGarage
Open-source Raspberry Pi power management and audio HAT for automotive head-unit use
79 parts9 - 2 layers115 × 100 mm
Cog1
diegodemarco/cog1
cog1 is an open-source industrial IoT gateway (hardware and software) built as a motherboard hosting an Orange Pi Zero 3 Linux SBC.
133 parts6MIT - 4 layers108 × 74 mm
STM32 Drone
bassammorsy/stm32-flight-controller
Custom 4-layer STM32F405RGTx quadcopter flight controller PCB designed in KiCad. Betaflight compatible, 4S–6S LiPo input, SMT assembled by JLCPCB.
104 parts3MIT - 4 layers56.4 × 56.4 mm
Questions
How big is the Kicker PCB?
It measures 61 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kicker use?
18 parts, built around the G5LE-14 DC12, B3B-XH-A(LF)(SN) and B560C-13-F-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicker KiCad files?
From the hughminhphan/PROJECTS repository on GitHub, at the commit this page was made from: the board is Goku _ Vegeta/4.0/kicker/kicker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicker design in my own project?
Its repository states no licence, so its author keeps all rights: ask hughminhphan before reusing the design.