2 layers47.6 × 27.3 mm
2 layers75 × 75 mm
Pulseremote
HughF/TR50MC1A clone of the Fronius TR50MC pulsing remote
- Size
- 75 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 15
- Pads
- 72
- Tracks, vias
- 118, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Sep 2020
- Updated
- 22 Oct 2021
Overview
Pulseremote is an open-source printed circuit board by HughF, from the HughF/TR50MC repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 75 × 75 mm with 27 parts on 15 nets, routed with 118 tracks and 10 vias.
Its parts include 15 resistors, 8 connectors and 4 capacitors.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k8 | Resistors_SMD:R_1206_HandSoldering | R2, R6, R11, R14 |
| 4 | 22k1 | Resistors_SMD:R_1206_HandSoldering | R1, R5, R12, R13 |
| 2 | 10k | Resistors_SMD:R_1206_HandSoldering | R3, R8 |
| 2 | 17k4 | Resistors_SMD:R_1206_HandSoldering | R7, R15 |
| 2 | 2k74 | Resistors_SMD:R_1206_HandSoldering | R4, R9 |
| 1 | 100n 63v | Capacitors_SMD:C_1206_HandSoldering | C4 |
| 1 | 100u 16v | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Hand | C3 |
| 1 | 1n 3kv | Capacitors_ThroughHole:C_Disc_D10.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 24k | Resistors_SMD:R_1206_HandSoldering | R10 |
| 1 | 2n2 3kv | Capacitors_ThroughHole:C_Disc_D10.0mm_W2.5mm_P5.00mm | C2 |
| 1 | Amphenol A | Connector_JST:JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical | J1 |
| 1 | Amphenol B | Connector_JST:JST_XH_B05B-XH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | Base Amp | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | Chassis GND | Wire_Pads:SolderWirePad_single_2-5mmDrill | J8 |
| 1 | Duty cycle | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | Pulse Amp | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | Pulse freq. | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | Pulse select SW | Connector_JST:JST_XH_B06B-XH-A_1x06_P2.50mm_Vertical | J7 |
Questions
How big is the Pulseremote PCB?
It measures 75 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pulseremote use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pulseremote KiCad files?
From the HughF/TR50MC repository on GitHub, at the commit this page was made from: the board is pulseremote.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pulseremote design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223