Skip to the content
2 layers99 × 99 mmBtns mother, the printed circuit board in 3D

Btns mother

hugelton/Btns12

Buttons board compatible with monome grid

Size
99 × 99 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
62
Pads
181
Tracks, vias
298, 13
Pours
62
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Aug 2024
Updated
29 Oct 2024

Overview

Btns mother is an open-source printed circuit board by hugelton, from the hugelton/Btns repository on GitHub, published under the MIT licence. It is a 2-layer board of 99 × 99 mm with 22 parts on 62 nets, routed with 298 tracks and 13 vias.

It is built around the TM1640. Its parts include 8 connectors, 4 ICs, 3 resistors and 1 capacitor. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

Btns

Buttons board compatible with monome grid

IMG_7507-1

Overview

Btns is a clone of Monome Grid.

**⚠️ It doesn't support 16 levels of LED grey scale. It just turns on or off. **

Make

Hardware

Make your board from the gerber.

BOM
  • Raspberry Pi Pico (or same footprint clones) * 1
  • TSHD-T-2.8T2 SMD Tact switch with LED * 64
  • 1N4148WS (SOD-323) SMD diode * 64
  • TM1640 LED segments driver * 1
  • 10k THT resistor * 2
  • 10ohm THT resistor * 1
  • MPU-6050 (optional for tilt mod)
  • VXO7803-500 (optional)
  • Eurorack 16pin Bus Conn (optional)

Firmware

upload the firmware to Pico from Release.

Test (on Norns)

Please use okyeron's grid-test

text
;install https://github.com/okyeron/grid-test

Plans

  • support MPU-6050 (tilt)
  • support multi-PWM
  • support other buttons

Acknowledgments

Based on okyeron's neotrellis-monome project.

Parts

22
QtyValueFootprintReferences
8Conn_01x04_PinLibrary:PinHeader_1x04_P2.54mm_VerticalJ1, J2, J3, J4, J5, J6, J7, J8
210kLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R3
110Library:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
110uFLibrary:C_Disc_D5.0mm_W2.5mm_P5.00mmC2
1IDC-Header_2x08_P2.54mm_VerticalLibrary:IDC-Header_2x08_P2.54mm_VerticalEur
1PicoLibrary:RPi_PicoU1
1TM1640Library:SOP-28_8.4x18.16mm_P1.27mmU4
1VX78_O78Library:VX78_O78U2
1module_mpu6050Library:module_mpu6050U3

The 17 most common of 22 parts.

More from hugelton/Btns

1
  • 2 layers99 × 99 mmBtns board, the printed circuit board in 3D

    Btns board

    hugelton/Btns

    Buttons board compatible with monome grid

    140 parts12MIT

Similar boards

  • 2 layers66.7 × 100 mmSEG-16-XXX XXXX L0, the printed circuit board in 3D

    SEG-16-XXX XXXX L0

    openKolibri/klais-16

    Sixteen Segment Display in the Klais range.

    191 parts58
  • 2 layers117.8 × 168 mmPicon one v1.0a, the printed circuit board in 3D

    Picon one v1.0a

    fm4dd/picon-one-hw

    KiCad PCB, gerber, and CAD files for the PiCon-One controller.

    73 parts23
  • 2 layers246 × 245.3 mmCatan100, the printed circuit board in 3D

    Catan100

    seanboyce/Calculus-the-game

    An electronic strategy board game about mining an asteroid and barter.

    25 parts19
  • 2 layers71.8 × 63.5 mmPlan b, the printed circuit board in 3D

    Plan b

    jwaeles/xmas-2019

    Dynamic christmas gift label that scrolls the name of the person it's for when you shake the gift

    152 parts3GPL-3.0
  • 2 layers21.4 × 36.7 mmTm1640 breakout, the printed circuit board in 3D

    Tm1640 breakout

    aleokdev/tm1640_breakout

    TM1640 Breakout Board

    13 parts1CC-BY-SA-4.0
  • 2 layers100 × 100 mmServermon, the printed circuit board in 3D

    Servermon

    seanboyce/servermon

    An ESP8266-based server monitor PCB displaying the status of up to 8 servers with RGB LEDs.

    27 parts1GPL-3.0
  • 2 layers67.9 × 35.6 mmWemos D1 mini weather station, the printed circuit board in 3D

    Wemos D1 mini weather station

    gabeak2/Wemos_D1_mini_weather_station

    Mini weather station built around ESP8266 WiFi SOC on a Wemos D1-Mini breakout PCB. Shows inside temperature and wifi-updated outside temp, and has LED to indicate for rain.

    22 parts
  • 2 layers44.9 × 106.8 mmPppcb, the printed circuit board in 3D

    Pppcb

    okelk/pppcb

    Table Tennis sensor pcb+display

    116 parts

Questions

How big is the Btns mother PCB?

It measures 99 × 99 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Btns mother use?

22 parts, built around the TM1640. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Btns mother KiCad files?

From the hugelton/Btns repository on GitHub, at the commit this page was made from: the board is Hardware/KiCAD/Btns/btns_mother.kicad_pcb and its schematic Hardware/KiCAD/Btns/Btns.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Btns mother design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).