Skip to the content
2 layers152.3 × 132.3 mmInu main, the printed circuit board in 3D

An (not portable but small) ergonomic split keyboad

Size
152.3 × 132.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
79
Nets
51
Pads
418
Tracks, vias
605, 94
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Aug 2018
Updated
26 Sep 2018

Overview

Inu main is an open-source printed circuit board by hsgw, from the hsgw/ergoinu repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 152.3 × 132.3 mm with 79 parts on 51 nets, routed with 605 tracks and 94 vias.

Its parts include 33 diodes, 5 connectors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

readme.md

Ergoinu

Ergoinu

Ergoinu

An (Not Portable But Small) Ergonomic Split Keyboard.

Keyboard Maintainer

Twitter @hsgw

Software Supported

QMK Firmware

Build guide & tips

wiki

Buy

shop

License

pcb and case designs are licensed under creative commons BY SA 4.0
https://creativecommons.org/licenses/by-sa/4.0/
(c) Takuya Urakawa (dm9recoreds.com)

Parts

79
QtyValueFootprintReferences
331N4148dm9_keyboard:D_SOD123_double_sideD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +17
32SW_Pushdm9_keyboard:SW_Cherry_MX1A_1.00u_Plate_double_sideSW_MX1, SW_MX2, SW_MX10, SW_MX11, SW_MX12, SW_MX13, SW_MX14, SW_MX15, SW_MX16, SW_MX17, SW_MX18, SW_MX19, SW_MX20, SW_MX21, SW_MX23, SW_MX24 +16
2Conn_01x03dm9_keyboard:WS2812_tape_10mmJ2, J3
2MJ-4PP-9dm9_conn:MJ-4PP-9CON1, CON2
2SW_Pushdm9_keyboard:SW_Cherry_MX1A_1.75u_Plate_double_sideSW_MX22, SW_MX30
2silkdm9_silks:logo_hsgw_7_5mmSILK1, SILK3
2silkdm9_silks:logo_dm9_15mmSILK2, SILK4
1Conn_01x01Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmJ1
1SW_Pushdm9_keyboard:SW_Cherry_MX1A_1.25u_Plate_double_sideSW_MX35
1TactSW_2pindm9_switches:TVBP06SW1
1pro_microdm9_keyboard:Pro_Micro_Reverse_silkU1

Similar boards

  • 2 layers36.8 × 34.7 mmTinylab proto1, the printed circuit board in 3D

    Tinylab proto1

    espotek-org/Labrador

    EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

    79 parts1.2k
  • 2 layers128.8 × 99.5 mmWarriorAttend, the printed circuit board in 3D

    WarriorAttend

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    79 parts915
  • 2 layers80 × 107.5 mmMinino, the printed circuit board in 3D

    Minino

    ElectronicCats/Minino

    Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.

    79 parts183GPL-3.0
  • 2 layers151.3 × 120.8 mmTairakb, the printed circuit board in 3D

    Tairakb

    strayer/taira-keyboard

    A wireless low-profile split mechanical keyboard with 66 keys inspired by the ErgoDash and Corne Chocolate

    79 parts164MIT
  • 2 layers100 × 100 mmStack, the printed circuit board in 3D

    Stack

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    79 parts145
  • 2 layers22 × 56 mmEsp32s2-funprog, the printed circuit board in 3D

    Esp32s2-funprog

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    79 parts114
  • 2 layers40.1 × 96.9 mmMultimult board, the printed circuit board in 3D

    Multimult board

    tpcarlson/synth-diy

    Mostly Eurorack projects

    79 parts107

Questions

How big is the Inu main PCB?

It measures 152.3 × 132.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Inu main use?

79 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Inu main KiCad files?

From the hsgw/ergoinu repository on GitHub, at the commit this page was made from: the board is pcb/inu_main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Inu main design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).