2 layers97.4 × 96.5 mm
2 layers384.8 × 161.3 mm
Alicja v2
hrw/keyboardsCollection of data for my keyboards
- Size
- 384.8 × 161.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 201
- Nets
- 132
- Pads
- 887
- Tracks, vias
- 1,077, 148
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 31 Mar 2025
- Updated
- 30 Jul 2026
Overview
Alicja v2 is an open-source printed circuit board by hrw, from the hrw/keyboards repository on GitHub, published under the MIT licence. It is a 2-layer board of 384.8 × 161.3 mm with 201 parts on 132 nets, routed with 1,077 tracks and 148 vias.
Its parts include 92 diodes, 87 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdHere I plan to keep information about keyboards I worked on.
Alicja v1
Yet another fork of fork of fork with Alice like layout.
Keyboard features:
- Handwired
- two encoders
- UltimatePico as MCU
- QMK with VIA.
Built only one copy. Dead keyboard, dead project.
Alicja v2
Keyboard features:
- PCB
- hotswap
- encoder
- 5-way switch
- stabilisers
- RP2040 Stamp as MCU
- QMK with VIA
- connector with spare GPIO lines and power
Parts
201| Qty | Value | Footprint | References |
|---|---|---|---|
| 92 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D10, D11, D12, D13, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +76 |
| 72 | SW_Push | SW_Hotswap_Kailh_MX_1.00u | SW2, SW10, SW11, SW13, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25, SW26, SW28 +56 |
| 13 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13 |
| 7 | SW_Push | SW_Hotswap_Kailh_MX_1.50u | SW30, SW43, SW61, SW62, SW64, SW69, SW70 |
| 5 | SW_stab | Stabilizer_Cherry_MX_2.00u | ST1, ST27, ST58, ST65, ST67 |
| 2 | SW_Push | SW_Hotswap_Kailh_MX_2.25u | SW1, SW27 |
| 2 | SW_Push | SW_Hotswap_Kailh_MX_2.00u | SW58, SW65 |
| 1 | Conn_01x07_Pin | Hrw:JST_XH_B8B-XH-AM_1x07_P2.50mm_Vertical_SMD | USB_Buttons1 |
| 1 | Conn_01x08_Pin | Hrw:JST_XH_B8B-XH-AM_1x08_P2.50mm_Vertical_SMD | J1 |
| 1 | Encoder | Hrw:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_SMD | SW88 |
| 1 | SW_Push | SW_Hotswap_Kailh_MX_1.75u | SW12 |
| 1 | SW_Push | SW_Hotswap_Kailh_MX_2.75u | SW67 |
| 1 | SW_Push | SW_Hotswap_Kailh_MX_1.25u | SW15 |
| 1 | SolderParty RP2040 Stamp | RP2xxx_Stamp:RP2xxx_Stamp_SMD | U1 |
| 1 | ~ | Hrw:4-Way Ali | 4-WayR1 |
Questions
How big is the Alicja v2 PCB?
It measures 384.8 × 161.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Alicja v2 use?
201 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Alicja v2 KiCad files?
From the hrw/keyboards repository on GitHub, at the commit this page was made from: the board is alicja-v2/pcb/Alicja v2.kicad_pcb and its schematic alicja-v2/pcb/Alicja v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Alicja v2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers116.1 × 98 mm
- 2 layers177.8 × 127 mm
- 2 layers251.3 × 108.7 mm
- 2 layers223.5 × 160 mm
- 2 layers101.6 × 147.3 mm
Karabas pro revD
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
201 parts37MIT - 2 layers140.7 × 47.4 mm
EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 2 layers228.6 × 114.3 mm
