

TinyBoard84100
Tiny ATtiny841 board in KiCAD
- Size
- 27.9 × 15.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 17
- Pads
- 55
- Tracks, vias
- 126, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Apr 2018
- Updated
- 2 May 2018
Overview
TinyBoard84100 is an open-source printed circuit board by HrnekBezucha, from the HrnekBezucha/TinyBoard84100 repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.9 × 15.2 mm with 13 parts on 17 nets, routed with 126 tracks and 11 vias.
It is built around the ATTINY841-MU and 78L05. Its parts include 3 resistors, 3 connectors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY841-MU
QFN-20-EP(4x4)-40℃~+85℃ 1.7V~5.5V 10bit 12 16MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH QFN-20-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)78L05
SOT-89-3-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdTinyBoard84100
Tiny beakout board for the ATtiny841 (or any other 14 pin AVR) with AVR ISP programming header, voltage regulated and with reset button.
It is programmable with the Arduino IDE with the ATtiny library addon thingy. Or a proper toolchain for all the tryhard nerds out there :)
Designed in KiCAD open-source and possibly for sale on Tindie somewhere in the future. No promisses.
It's actually a second version of the design, first was not published nor tested. It was designed, manufactured and forgoten about.
If you're experienced and want to tell me how wrong I did everything, feel free to PM me. I'm open to your feedback.
Q: What's so special about the ATtiny841?
A: Compared to ATtiny84, the ATtiny841 has one extra 16-bit timer with two PWM channels, one more ADC, more input channels, one extra comparator, one extra USART. And for more details go check Microchip's product site. If you want to build it yourself, ATtiny84 seem to be pin compatible so you should be just fine using that if you want to shave off few cents and/or don't need the extra functionality of 841.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3 |
| 2 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | P2, P3 |
| 2 | LED | LEDs:LED_0805 | D1, D2 |
| 1 | 1uF | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 4.7uF | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 78L05 | TO_SOT_Packages_SMD:SOT89-3_Housing_Handsoldering | U1 |
| 1 | ATTINY841 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U2 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P4 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_FSMSM | SW1 |
Similar boards
- 2 layers56.6 × 22.2 mm

- 2 layers65 × 56 mm

Toy Ikea MicrowaveController
SkullKill/Toy-Ikea-MicrowaveController-PCB
PCB for Microwave Controller for Ikea Kitchen DUKTIG
73 parts1GPL-3.0 - 2 layers36.8 × 34.7 mm

Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 2 layers51.8 × 32.6 mm

C64-rf modulator replacement
mbarszcz-pcb/c64-rf-modulator-replacement
C64 Composite/S-Video RF Modulator Replacement
33 parts86MIT - 2 layers86.4 × 69.9 mm

- 2 layers106 × 95.4 mm

- 2 layers41.1 × 110.7 mm

- 2 layers99.1 × 63.5 mm

Questions
How big is the TinyBoard84100 PCB?
It measures 27.9 × 15.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TinyBoard84100 use?
13 parts, built around the ATTINY841-MU and 78L05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TinyBoard84100 KiCad files?
From the HrnekBezucha/TinyBoard84100 repository on GitHub, at the commit this page was made from: the board is TinyBoard84100.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TinyBoard84100 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).