
Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

6-DOF robot arm (open-source TW2KA) with my own KiCad PCB, Teensy 4.1 firmware and a browser controller with inverse kinematics and G-code drawing.
Tw2ka pcb is an open-source printed circuit board by hritesh94, from the hritesh94/6-DOF-Robot- repository on GitHub. It is a 4-layer board of 102 × 100 mm with 44 parts on 110 nets, routed with 431 tracks and 8 vias.
It is built around the TEENSY 4.1. Its parts include 32 connectors, 1 IC and 1 fuse. It belongs with the robots and motor control boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
My own control board for the TW2KA arm: a Teensy 4.1 driving six TMC2209 stepper drivers, with endstop inputs. Designed in KiCad 10.
| Size | 102 × 100 mm |
| Layers | 4 (F.Cu, In1.Cu, In2.Cu, B.Cu) |
| MCU | Teensy 4.1 (socketed) |
| Drivers | 6 × TMC2209 modules (socketed) |
| Per driver | STEP, DIR, EN to the Teensy; UART RX/TX lines routed (J1–J6_RX/TX); MS1, MS2 and SPREAD selectable |
| Endstops | 5 inputs (SW_1–SW_5) for J1–J5 |
| Power | Motor supply via terminal block and fuse, 100 µF capacitor per driver, separate logic supply (VIO) |
https://github.com/user-attachments/assets/b51a67fe-33f5-430a-8fab-c27dd11908fc
Pin map and endstop wiring: docs/02-hardware.md.
hardware/pcb/
├── tw2ka_pcb.kicad_pro ← open this in KiCad
├── tw2ka_pcb.kicad_sch ← schematic
├── tw2ka_pcb.kicad_pcb ← board layout
├── fp-lib-table ← project footprint library table
├── Tmc2209_pin_socket.pretty/ ← custom TMC2209 socket footprint (to add)
├── 3d/
│ └── tw2ka_pcb.step ← 3D model of the assembled board
└── fabrication/
├── tw2ka_pcb-PTH.drl ← plated drill file
├── tw2ka_pcb-NPTH.drl ← non-plated drill file
└── gerbers/ ← Gerber files for the board house (to add)Opening the board works without the footprint libraries (footprints are stored inside the .kicad_pcb). To edit footprints you also need the Tmc2209_pin_socket.pretty folder and the Teensy footprint library (teensy.pretty, available on GitHub).
Upload the Gerbers and both drill files from fabrication/ to a PCB manufacturer (JLCPCB, PCBWay, etc.) and choose 4 layers.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | C_Polarized_Small | Capacitor_SMD:CP_Elec_6.3x7.7 | 100uf1, 100uf2, 100uf3, 100uf4, 100uf5, 100uf6 |
| 6 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J24, J27, J28, J29, J30, J31 |
| 6 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17, J18, J19, J20, J21, J22 |
| 6 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13, J14, J15, J16, J39, J40 |
| 6 | Conn_02x08_Odd_Even | Tmc2209_pin_socket:TMC2209_MODULE | J1, J2, J3, J4, J5, J6 |
| 5 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8, J9, J10, J11 |
| 2 | Conn_01x24_Pin | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J23, J25 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J12 |
| 1 | Teensy4.1 | teensy.pretty-master:Teensy41 | U1 |
The 40 most common of 44 parts.

newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels





jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1

FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
It measures 102 × 100 mm and has 4 copper layers, 1.6 mm thick.
44 parts, built around the TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hritesh94/6-DOF-Robot- repository on GitHub, at the commit this page was made from: the board is hardware/pcb/tw2ka_pcb.kicad_pcb and its schematic hardware/pcb/tw2ka_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hritesh94 before reusing the design.