
2023 control pcb
HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here

Find my simulation files and PCB_Designs here
555 timer2 is an open-source printed circuit board by HrishikeshMRao, from the HrishikeshMRao/Electronics_Hardware_Projects repository on GitHub. It is a 2-layer board of 56.9 × 80.5 mm with 10 parts on 7 nets, routed with 41 tracks and 0 vias.
Its parts include 3 resistors, 2 diodes, 1 capacitor and 1 IC.
Find my simulation files and PCB_Designs here. This is my work in the 2nd year of Engineering where i designed numerrous PCBs and ran simulations to enhance my knowledge in electronics.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 470 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2 |
| 1 | 10nf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1N5400 | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | D3 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R3 |
| 1 | 3 | digikey-footprints:Battery_Holder_Coin_2032_BS-7 | BAT1 |
| 1 | 470 | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical | RV1 |
| 1 | 7555 | Library:ICM7555-PDIP | U1 |
| 1 | 9 | digikey-footprints:Battery_Holder_9V_BC9VPC-ND | BAT2 |
| 1 | RED | digikey-footprints:LED_3mm_Radial | D1 |

HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here

HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here

HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here

HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 56.9 × 80.5 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HrishikeshMRao/Electronics_Hardware_Projects repository on GitHub, at the commit this page was made from: the board is PCB Designs/KiCad works/555 Timer/555 timer2/555 timer2.kicad_pcb and its schematic PCB Designs/KiCad works/555 Timer/555 timer2/555 timer2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask HrishikeshMRao before reusing the design.