4 layers84.8 × 84.3 mm
Beuty
HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here
58 parts2
2 layers226.6 × 159.3 mm
2023 control pcb
HrishikeshMRao/Electronics_Hardware_Projects2Find my simulation files and PCB_Designs here
- Size
- 226.6 × 159.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 109
- Pads
- 293
- Tracks, vias
- 452, 312
- Pours
- 50
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Jul 2023
- Updated
- 14 Dec 2023
Overview
2023 control pcb is an open-source printed circuit board by HrishikeshMRao, from the HrishikeshMRao/Electronics_Hardware_Projects repository on GitHub. It is a 2-layer board of 226.6 × 159.3 mm with 74 parts on 109 nets, routed with 452 tracks and 312 vias.
It is built around the XT30PB(2+2)-M and XT60PW-M. Its parts include 49 connectors, 9 resistors, 9 diodes and 1 IC. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdElectronics_Hardware_Projects
Find my simulation files and PCB_Designs here. This is my work in the 2nd year of Engineering where i designed numerrous PCBs and ran simulations to enhance my knowledge in electronics.
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | XT30PB | general components:XT30PB | J3, J4, J12, J13, J14, J15, J16, J17, J20, J21, J25, J26, J27, J28, J31, J32 +2 |
| 9 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | R_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 6 | Conn_01x04_Female | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J9, J10, J11, J22, J23, J24 |
| 6 | Conn_02x02_Counter_Clockwise | fuse holder:fuseholder_355720 | J7, J8, J18, J19, J29, J30 |
| 4 | Conn_01x03_Male | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J34, J35, J36, J37 |
| 4 | MountingHole | MountingHole:MountingHole_5.3mm_M5_DIN965 | H1, H3, H5, H5 |
| 3 | XT60PW-M | xt60:AMASS_XT60PW-M | J1, J2, J33 |
| 3 | l4 | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J40, J46, J49 |
| 2 | Conn_01x20_Male | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J41, J42 |
| 1 | Conn_01x03_Male | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J47 |
| 1 | L1,L2,S | Connector_JST:JST_EH_S8B-EH_1x08_P2.50mm_Horizontal | J48 |
| 1 | LOGO | 16_pin_IDC:MRM_LOGO | G5 |
| 1 | Raspberry_Pi_2_3 | rpi:MODULE_RASPBERRY_PI_3_MODEL_B+ | J38 |
| 1 | TJA1050_MODULE | TJA1050*:TJA1050_MODULE | U1 |
| 1 | esp32 | 16_pin_IDC:esp32 | J39 |
| 1 | l1 | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J43 |
| 1 | l2 | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J44 |
| 1 | l3 | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J45 |
The 73 most common of 74 parts.
More from HrishikeshMRao/Electronics_Hardware_Projects
4- 2 layers56.9 × 80.5 mm
555 timer2
HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here
10 parts2 - 2 layers19.1 × 48.8 mm
Shield md
HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here
2 parts2 - 2 layers33 × 67.6 mm
Shield rpy
HrishikeshMRao/Electronics_Hardware_Projects
Find my simulation files and PCB_Designs here
2 parts2
Similar boards
- 2 layers62 × 50 mm
Driver
jkirsons/stealth-controller
With 8A driver, Magnetic Sensor, Microcontroller, Two-Wire Automotive Interface
50 parts93 - 2 layers50 × 36 mm
- 6 layers49.9 × 49.9 mm
MTR Tiny MD
MoreThanRobotsFR/MTR_Tiny_MD
This Arduino project utilizes SimpleFOC library for sensor-based brushless motor control with a DRV8316 driver. It also incorporates an Adafruit NeoPixel for visual feedback.
101 parts10MIT - 2 layers29.8 × 46.2 mm
Daisy Board Out
williamthayer/DaisyBoards
A full repo of all the design files for each DaisyBoard
88 parts1 - 4 layers75 × 65 mm
- 2 layers30 × 17 mm
Adapter
BerkeleyBikeBuilders/TelemetryComputer
FW and HW for full suspension telemetry data logger
14 partsApache-2.0 - 6 layers56.1 × 88 mm
Bldc&foc motor controller
bejaouihamza/bldc-foc-pcb
This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.
108 parts16 - 4 layers262 × 110.5 mm
HM CENTRAL-02 painel
BenjamimKrug/robo_humanoide
Repositorio para arquivos gerais necessários para o desenvolvimento do Robô humanoide
303 parts10
Questions
How big is the 2023 control pcb PCB?
It measures 226.6 × 159.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2023 control pcb use?
74 parts, built around the XT30PB(2+2)-M and XT60PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2023 control pcb KiCad files?
From the HrishikeshMRao/Electronics_Hardware_Projects repository on GitHub, at the commit this page was made from: the board is PCB Designs/KiCad works/central_PCB first design by senior - Meet Jain/2023 control pcb/2023 control pcb.kicad_pcb and its schematic PCB Designs/KiCad works/555 Timer/555 timer2/555 timer2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2023 control pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask HrishikeshMRao before reusing the design.