
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying

NRF24 TX is an open-source printed circuit board by HoussemFTW, from the HoussemFTW/NRF24PCBTX repository on GitHub. It is a 2-layer board of 60 × 38.8 mm with 18 parts on 33 nets, routed with 219 tracks and 1 via.
It is built around the AMS1117-3.3 and AMS1117-5.0. Its parts include 5 capacitors, 4 ICs, 3 resistors, 3 connectors and 2 diodes. It belongs with the PIC boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10µf | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2, C6 |
| 2 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3 |
| 2 | 33pf | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C4, C5 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D1, D2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BUTT1 | Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_Vertical | J2 |
| 1 | CONN | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x12_Socket | Connector_PinSocket_2.00mm:PinSocket_1x12_P2.00mm_Vertical | J1 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U1 |
| 1 | PIC18F2520-xSP | Nouveau dossier (5):DIP787W46P254L3467H508Q28 | U2 |

victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying



barbinbrad/raccoon
Car Hacking PCB and firmware for a USB to CAN interface, with support for 4 CAN transceivers and an optional NEO-MP8 GNSS module.

NYDEREK/LineFollower_GRUZIK3.0
Loved the project? Please consider giving a Star ⭐️


danheeks/vario
paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys

It measures 60 × 38.8 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HoussemFTW/NRF24PCBTX repository on GitHub, at the commit this page was made from: the board is NRF24_TX/NRF24_TX.kicad_pcb and its schematic NRF24_TX/NRF24_TX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask HoussemFTW before reusing the design.