2 layers309.6 × 95.3 mm
Layout board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
157 parts915
2 layers74.9 × 64.8 mm
LoLSnakes
hotwolf/LoLSnakesAn enhanced LoL shield for the purpose of implementing a snakes game.
- Size
- 74.9 × 64.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 157
- Nets
- 43
- Pads
- 336
- Tracks, vias
- 534, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 May 2018
- Updated
- 30 May 2019
Overview
LoLSnakes is an open-source printed circuit board by hotwolf, from the hotwolf/LoLSnakes repository on GitHub. It is a 2-layer board of 74.9 × 64.8 mm with 157 parts on 43 nets, routed with 534 tracks and 0 vias.
Its parts include 126 diodes, 1 connector and 1 switch.
README
READMELoLSnakes
An enhanced LoL shield for the purpose of implementing a snakes game.
This project contains the working material for a two day secondary school Arduino workshop.
Directories:
| +-Hardware - Everything needed to build the LoLSnakes shield | +-Software - Source files of the LoLSnakes shields firmware | +-Workshop - Workshop materials
The LoLSnakes software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with the LoLSnakes shield firmware. If not, see http://www.gnu.org/licenses/.
The hardware design of the LoLSnakes shield is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License (http://creativecommons.org/licenses/by-sa/3.0/).
The LoLSnakes shield uses Kicad library components by Walter Lain which are licensed under a Creative Commons Attribution-ShareAlike 3.0 License (http://creativecommons.org/licenses/by-sa/3.0/).
Parts
157| Qty | Value | Footprint | References |
|---|---|---|---|
| 126 | LED | LoLSnakes:led_3mm_clear | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +110 |
| 14 | GND | LoLSnakes:via | VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA |
| 13 | R | LoLSnakes:rc03 | R_BZ1, R_PB0, R_PB1, R_PB2, R_PB3, R_PB4, R_PB5, R_PD2, R_PD3, R_PD4, R_PD5, R_PD6, R_PD7 |
| 1 | ARDUINO | LoLSnakes:arduino_header_extended | J1 |
| 1 | BUZZER | LoLSnakes:buzzer | BZ1 |
| 1 | Encoder | LoLSnakes:encoder_lowered | SW1 |
| 1 | LOGO | LoLSnakes:Logo_silk_CC-BY-SA_10x4.5mm | G*** |
Similar boards
- 2 layers149.6 × 108.1 mm
- 2 layers109.5 × 76 mm
- 2 layers482.5 × 711 mm
- 2 layers268 × 110.5 mm
Unicorn
yanghu/unicorne
A one-piece 40% ortho keyboard design inspired by crkbd, Kyria and Ferris.
157 parts63MIT - 2 layers243.9 × 136.5 mm
Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
157 parts57 - 2 layers100 × 100 mm
1.3e
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
157 parts19 - 2 layers101.3 × 108.5 mm
Questions
How big is the LoLSnakes PCB?
It measures 74.9 × 64.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LoLSnakes use?
157 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoLSnakes KiCad files?
From the hotwolf/LoLSnakes repository on GitHub, at the commit this page was made from: the board is Hardware/RevA/KiCad/LoLSnakes.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoLSnakes design in my own project?
Its repository states no licence, so its author keeps all rights: ask hotwolf before reusing the design.