

DRC SLVD2025
- Size
- 60 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 83
- Pads
- 244
- Tracks, vias
- 302, 189
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Jul 2026
- Updated
- 10 Jul 2026
Overview
DRC SLVD2025 is an open-source printed circuit board by hosh0344, from the hosh0344/CatchRobo2025_Circuits repository on GitHub. It is a 2-layer board of 60 × 45 mm with 66 parts on 83 nets, routed with 302 tracks and 189 vias.
It is built around the TLP293-4(E, 2SK4017(Q) and SS2040FL, with the WS2812B among its other parts. Its parts include 22 resistors, 11 capacitors, 8 diodes, 8 connectors and 4 transistors.
Main components
4TLP293-4(E
SOIC-16-4.6mmTransistor, Photovoltaic Output OptoisolatorsToshiba2SK4017(Q)
TO-251(IPAK)1 N-channel 150mΩ@4V 15nC@10V 2.5V 20W 5A 60V 60pF 730pF 95pF N-Channel ±20V TO-251(IPAK) MOSFETs ROHSToshibaMOSFETsSS2040FL
SOD-123FLSOD-123FL Schottky Diodes ROHSFUXINSEMISchottky DiodesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdキャチロボ2025で使用した回路
MCUにはArduino Uno R4に搭載のRenesasのR7FA4M1AB3CFMを使用し、Arduino IDEで開発を行いました。
1. SVMD2025
4chのシンプルなサーボモータ制御回路です。
ファイルはこちら
2. SLVD2025
4chの電磁弁駆動回路。電源電圧は5Vでも対応可能。
NMOSは2SK4017
ファイルはこちら
3. DCDCコンバータ
MurataのOKL-T/6-W12N-Cを用いた5Vの降圧チョッパ回路。
出力電圧は可変抵抗で4.5V-5.5Vまで調整可能です。
ファイルはこちら
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R7, R8, R11 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C6, C8, C9 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R17, R18, R21, R22 |
| 5 | 2.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R14, R15, R19, R20 |
| 4 | 2SK4017 | Transistor_Power:TO230P230X650X740-3P | Q1, Q2, Q3, Q4 |
| 4 | D_Schottky_Small | Diode_SMD:D_SOD-123F | D3, D4, D5, D6 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | CAN | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J7, J8 |
| 1 | +5V | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C10 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | BATTERY | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J9 |
| 1 | BOOT | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | CAN_TR | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | ID | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | LOGO | MyLogo:kuma | G*** |
| 1 | MCP2562-H-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | R7FA4M1AB3CFM_AA0 | MCU_Library:R7FA4M1AB3CFM | U1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_EVQPE1 | SW1 |
| 1 | SLV0 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | SLV1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J13 |
| 1 | SLV2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | SLV3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J14 |
| 1 | SS2040FL | Diode_SMD:D_SOD-123F | D1 |
| 1 | TLP293-4 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | U3 |
| 1 | USB | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
The 61 most common of 66 parts.
More from hosh0344/CatchRobo2025_Circuits
2- 2 layers60 × 45 mm

- 2 layers60 × 45 mm

Similar boards
- 2 layers100 × 70 mm

- 2 layers90 × 50 mm

- 2 layers87.4 × 70 mm

- 2 layers29 × 52.3 mm

- 2 layers79.5 × 88.4 mm

- 2 layers58 × 78 mm

IC SDC Hub V2.3
ManchesterStingerMotorsports/IC-SDC-Hub
New shutdown Circuit Hub for the IC car.
34 parts - 2 layers

- 4 layers70 × 45 mm

Questions
How big is the DRC SLVD2025 PCB?
It measures 60 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DRC SLVD2025 use?
66 parts, built around the TLP293-4(E, 2SK4017(Q), SS2040FL and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRC SLVD2025 KiCad files?
From the hosh0344/CatchRobo2025_Circuits repository on GitHub, at the commit this page was made from: the board is DRC-SLVD2025/DRC-SLVD2025.kicad_pcb and its schematic DCDC_Converter/DC-DC Converter_01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRC SLVD2025 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hosh0344 before reusing the design.