

MDD test
遠隔非常停止の設計
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 10
- Pads
- 41
- Tracks, vias
- 112, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Aug 2024
- Updated
- 23 Jul 2026
Overview
MDD test is an open-source printed circuit board by Hori296, from the Hori296/wireless_stop_mod repository on GitHub. It is a 2-layer board with 21 parts on 10 nets, routed with 112 tracks and 4 vias.
It is built around the 2SK3140-E. Its parts include 6 resistors, 6 transistors and 5 connectors.
Main components
1README
readme.mdロボコン部用の遠隔非常停止用回路
ファイルの置き場所とか適当だったから,MDDのテスト用回路の設計プロジェクトの中に遠隔非常停止用回路の設計がある ??
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R4, R6 |
| 2 | 2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5 |
| 2 | 2SJ334 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2, Q5 |
| 2 | 2SK369 | Package_TO_SOT_THT:TO-92 | Q1, Q6 |
| 2 | 2Sk3140 | Package_TO_SOT_THT:TO-220-3_Vertical | Q3, Q4 |
| 1 | OUT-A | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | J1 |
| 1 | OUT-B | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | J2 |
| 1 | gnd | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | J5 |
| 1 | pwm | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | vcc | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | J4 |
The 17 most common of 21 parts.
More from Hori296/wireless_stop_mod
1- 2 layers85.1 × 47.5 mm

Similar boards
- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm

- 2 layers161.3 × 111.8 mm

Questions
What parts does the MDD test use?
21 parts, built around the 2SK3140-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MDD test KiCad files?
From the Hori296/wireless_stop_mod repository on GitHub, at the commit this page was made from: the board is MDD_test/MDD_test.kicad_pcb and its schematic MDD_test/MDD_test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MDD test design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hori296 before reusing the design.