

Backplane
8088 SBC
- Size
- 94 × 172.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 111
- Pads
- 486
- Tracks, vias
- 2,316, 38
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 May 2024
- Updated
- 24 Feb 2025
Overview
Backplane is an open-source printed circuit board by homebrew8088, from the homebrew8088/8088PCB repository on GitHub. It is a 2-layer board of 94 × 172.7 mm with 44 parts on 111 nets, routed with 2,316 tracks and 38 vias.
It is built around the NE555P. Its parts include 15 capacitors, 4 resistors, 1 IC, 1 diode and 1 connector.
Main components
1Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C14, C15 |
| 12 | L | Motherboard:Large_Via | R, R, R, R, R, R, R, R, R, R, R, R |
| 4 | Bus_ISA_16bit | Motherboard_ATX:16-bit-ISA | ISA1, ISA2, ISA3, ISA4 |
| 1 | 220k ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 27k ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 33k ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 4.7uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C13 |
| 1 | 510 ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | ATX POWER | My:24_PIN_ATX_POWER | ATXPOWER1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Power | LED_THT:LED_D3.0mm | D1 |
| 1 | Power Button | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Power Pins | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
The 40 most common of 44 parts.
More from homebrew8088/8088PCB
2- 4 layers177.8 × 106.7 mm

- 2 layers75.1 × 111.8 mm

Similar boards
- 2 layers327.9 × 139 mm

Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
147 parts446 - 2 layers370.8 × 298.5 mm

8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers200 × 96 mm

Touchtone555
DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus
73 parts33 - 4 layers340 × 210 mm

- 2 layers152.9 × 74.9 mm

- 2 layers88.9 × 50.8 mm

SynthCard
benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.
16 parts19MIT - 4 layers194.5 × 188.6 mm

MyCpu
fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.
162 parts18MIT - 2 layers145.3 × 129.9 mm

C128Diag
hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
61 parts16
Questions
How big is the Backplane PCB?
It measures 94 × 172.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Backplane use?
44 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Backplane KiCad files?
From the homebrew8088/8088PCB repository on GitHub, at the commit this page was made from: the board is Kicad/Backplane/Backplane.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Backplane design in my own project?
Its repository states no licence, so its author keeps all rights: ask homebrew8088 before reusing the design.