4 layers120 × 113 mm
Voron Klipper Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
360 parts1.1kGPL-3.0
4 layers35 × 40 mm
Phocuser
hollanderic/phocuser-hwkicad files for phocuser control board
- Size
- 35 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 106
- Pads
- 295
- Tracks, vias
- 451, 89
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Feb 2021
- Updated
- 15 Sep 2022
Overview
Phocuser is an open-source printed circuit board by hollanderic, from the hollanderic/phocuser-hw repository on GitHub. It is a 4-layer board of 35 × 40 mm with 62 parts on 106 nets, routed with 451 tracks and 89 vias.
It is built around the FT231XQ-R, TMC2130-LA and TLV76033DBZT, with the BAT54C and DX07S016JA1R1500 among its other parts. Its parts include 21 resistors, 19 capacitors, 8 connectors, 4 ICs and 4 diodes.
Main components
5
FT231XQ-R
QFN-20-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-20-EP(4x4) USB Converters ROHSFTDIUSB Converters
TMC2130-LA
QFN-36-EP(5x6)QFN-36-EP(5x6) Motor Driver ICs ROHSTRINAMIC Motion Control GmbHMotor Driver ICs
TLV76033DBZT
SOT-23-40℃~+125℃@(Tj) 1 1.2V@(100mA) 100mA 3.3V 30V 5mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
DX07S016JA1R1500
SMD-40℃~+85℃ 1 250mA、1.25A 48V Black Female Type-C USB 2.0 SMD USB Connectors ROHSJAE ElectronicsUSB Connectors
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nf | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C9, C10, C14, C15, C16, C17, C18 |
| 4 | 27 | Resistor_SMD:R_0402_1005Metric | R8, R9, R17, R18 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 2.2 | Resistor_SMD:R_0402_1005Metric | R1, R4, R12 |
| 3 | 470 | Resistor_SMD:R_0402_1005Metric | R14, R15, R16 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D3, D4 |
| 2 | 0.11 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R21 |
| 2 | 27pf | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 470nF | Capacitor_SMD:C_0402_1005Metric | C1, C19 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R13, R20 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 10nf | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 22nf | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 4.7U | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | Accessory 0 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J5 |
| 1 | Accessory 1 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J6 |
| 1 | Accessory 2 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J8 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | Conn_01x02_Male | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J3 |
| 1 | Conn_01x04_Male | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | DX07S016JA1R1500 | usbccon:JAE_DX07S016JA1R1500 | J4 |
| 1 | FT231XQ | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U3 |
| 1 | Ferrite_Bead | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | HolyIot-18010 | Phischbol:HOLYIOT-18010 | U1 |
| 1 | TLV76033DBZT | footprints:TLV76033DBZT | U4 |
| 1 | TMC2130-LA | Package_DFN_QFN:QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.1mm_ThermalVias | U2 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0402_1005Metric | TH1 |
| 1 | USB | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J7 |
Similar boards
- 4 layers106 × 45 mm
- 2 layers99.1 × 55.4 mm
ESP32 Plotter Controller revB1 unrouted
MarkJB/ESP32_Plotter_Controller
An ESP32/TMC2130 based 2 axis controller designed for pen plotters
53 parts9MIT - 4 layers143 × 55 mm
- 4 layers43 × 95 mm
Oe commutator controller
open-ephys/commutators
Active coaxial commutator for electrophysiology
92 parts5 - 2 layers120 × 100 mm
Onstep
andshn/OnStep_STM32_PCB
This is a PCB for OnStep, designed for 1455N1201 case. In the board use XLR connectors for steper drivers. The DB9 connector use for the hand controller.
137 parts3CC-BY-SA-4.0 - 4 layers100 × 90 mm
- 4 layers126 × 57 mm
Questions
How big is the Phocuser PCB?
It measures 35 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Phocuser use?
62 parts, built around the FT231XQ-R, TMC2130-LA, TLV76033DBZT and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Phocuser KiCad files?
From the hollanderic/phocuser-hw repository on GitHub, at the commit this page was made from: the board is phocuser.kicad_pcb and its schematic phocuser.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Phocuser design in my own project?
Its repository states no licence, so its author keeps all rights: ask hollanderic before reusing the design.