2 layers196.3 × 114.7 mm
MCD Rev2
prrtzel/GeorgeOS-Single-Board-Computer
This was the final project for the Microcomputer Design Course at LeTourneau University.
85 parts2
4 layers101.6 × 101.6 mm
SBC09
hoglet67/SBC093Respsitory for the SBC09 6809/6309 Board Design
- Size
- 101.6 × 101.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 107
- Pads
- 454
- Tracks, vias
- 1,375, 223
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Oct 2022
- Updated
- 8 Jul 2023
Overview
SBC09 is an open-source printed circuit board by hoglet67, from the hoglet67/SBC09 repository on GitHub. It is a 4-layer board of 101.6 × 101.6 mm with 60 parts on 107 nets, routed with 1,375 tracks and 223 vias.
It is built around the ATF22V10C-7PX, 74HCT125PW and 74LS670, with the AS6C4008-55PCN, MCP100-460DI/TO and XR68C681CJ-F among its other parts. Its parts include 14 capacitors, 12 ICs, 5 resistors, 5 connectors and 2 crystals. It belongs with the FPGA and CPLD boards of this library.
Main components
6
ATF22V10C-7PX
PDIP-245V EEPLD PDIP-24 Programmable Logic Device (CPLDs/FPGAs) ROHSMicrochip TechnologyProgrammable Logic Device (CPLDs/FPGAs)
74HCT125PW
TSSOP-14-40℃~+125℃ 1 15ns@4.5V,50pF 160uA 4 4.5V~5.5V 6mA 6mA 74HCT Tri-State Unidirectional TSSOP-14 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74LS670
-Specialty LogicTexas Instruments
AS6C4008-55PCN
PDIP-320℃~+70℃ 2.7V~5.5V 30mA 4Mbit 4uA 55ns Parallel Port (Parallel) PDIP-32 SRAM ROHSAlliance MemorySRAM
MCP100-460DI/TO
TO-92-3-40℃~+85℃@(TA) 1 150ms 4.475V Active Low Push-pull Simple Reset/Power-On Reset TO-92-3 Supervisor and Reset ICs ROHSMicrochip TechnologySupervisor And Reset ICs
XR68C681CJ-F
PLCC-44(16.6x16.6)2 5V Low-power mode、Hardware flow control support、Automatic error detection PLCC-44(16.6x16.6) UART ROHSMaxLinearUART
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 8 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP6, JP8, JP9, JP10, JP11 |
| 4 | 2.7mm | MountingHole:MountingHole_2.7mm | H1, H2, H3, H4 |
| 4 | 74LS670 | Package_DIP:DIP-16_W7.62mm_Socket | U4, U5, U6, U7 |
| 3 | 10K | Resistor_THT:R_Array_SIP5 | RN2, RN3, RN4 |
| 3 | Conn_01x06_Male | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J2, J3, J4 |
| 2 | ATF22V10C | Package_DIP:DIP-24_W7.62mm_Socket | U9, U10 |
| 2 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5, JP7 |
| 1 | 1K0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 3.6864MHz | Oscillator:Oscillator_DIP-8 | X2 |
| 1 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 3K0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C13 |
| 1 | 4K7 | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 74HCT125 | Package_DIP:DIP-14_W7.62mm_Socket | U8 |
| 1 | 8MHz | Oscillator:Oscillator_DIP-8 | X1 |
| 1 | AS6C4008-55PCN | Package_DIP:DIP-32_W15.24mm_Socket | U3 |
| 1 | Conn_01x04_Male | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_02x25_Odd_Even | Connector_IDC:IDC-Header_2x25_P2.54mm_Horizontal | J1 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP12 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP4 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D1 |
| 1 | MC6809E | Package_DIP:DIP-40_W15.24mm_Socket | U1 |
| 1 | MCP100-460D | Package_TO_SOT_THT:TO-92_HandSolder | U12 |
| 1 | NF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C14 |
| 1 | SST39SF040-DIP | Package_DIP:DIP-32_W15.24mm_Socket | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | XR68C681CJ | Package_LCC:PLCC-44_THT-Socket | U11 |
Questions
How big is the SBC09 PCB?
It measures 101.6 × 101.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SBC09 use?
60 parts, built around the ATF22V10C-7PX, 74HCT125PW, 74LS670 and AS6C4008-55PCN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SBC09 KiCad files?
From the hoglet67/SBC09 repository on GitHub, at the commit this page was made from: the board is kicad/sbc09.kicad_pcb and its schematic kicad/sbc09.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SBC09 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hoglet67 before reusing the design.
Similar boards
- 4 layers160 × 100 mm
Rosco m68k
rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)
140 parts200 - 4 layers100 × 100 mm
Rosco 6502
rosco-6502/rosco_6502
Design, documentation and software for the Really Old School Computer (6502)
62 parts8MIT - 8 layers304.8 × 190.5 mm
- 2 layers101.6 × 101.6 mm
- 4 layers180 × 120 mm
Crmaykish mackerel-68k mackerel-08-v1
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
86 parts1 - 4 layers160 × 100 mm
- 2 layers160 × 200 mm
Retro programmer
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
209 parts15