Skip to the content
1234567891011121314151617181920212223242526272829303132333435363738394041424344

XR68C681CJ-F

MaxLinearExtended

2 5V Low-power mode、Hardware flow control support、Automatic error detection PLCC-44(16.6x16.6) UART ROHS

Part id
maxlinear/XR68C681CJ-F
Category
UART
Package
PLCC-44(16.6x16.6)
Pins
44
In stock
0 at JLCPCB (C6036618)
Used on
2 open-source boards

Overview

The XR68C681CJ-F is an UART made by MaxLinear in a PLCC-44(16.6x16.6) package with 44 pins. 2 5V Low-power mode、Hardware flow control support、Automatic error detection PLCC-44(16.6x16.6) UART ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:XR68C681CJ-F, from EasyEDA) and its footprint (EasyEDA_Cloud:PLCC-44_L16.6-W16.6-P1.27-LS17.5-L, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C6036618). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1NC2A13IP34A25IN16A37A48IP09R#/W#10DTALK#11RXDB12NC13TXDB14OP115OP316OP517OP718D119D320D521D722GND23NC24INTR25D626D427D228D029OP630OP431OP232OP033TXDA34NC35RXDA36X1/CLK37X238RESET#39CS40IP241IACK#42IP543IP444VCC
EasyEDA_Cloud:XR68C681CJ-FFrom EasyEDA

Footprint

1234567891011121314151617181920212223242526272829303132333435363738394041424344
EasyEDA_Cloud:PLCC-44_L16.6-W16.6-P1.27-LS17.5-LFrom EasyEDA

From the datasheet

2
Works from
0 °C · TA, specified operating range, min · p. 8
Works up to
70 °C · TA, specified operating range, max · p. 8

Pinout

44
The pins of the XR68C681CJ-F
PinNameType
1NCUnspecified
2A1Unspecified
3IP3Unspecified
4A2Unspecified
5IN1Unspecified
6A3Unspecified
7A4Unspecified
8IP0Unspecified
9R#/W#Unspecified
10DTALK#Unspecified
11RXDBUnspecified
12NCUnspecified
13TXDBUnspecified
14OP1Unspecified
15OP3Unspecified
16OP5Unspecified
17OP7Unspecified
18D1Unspecified
19D3Unspecified
20D5Unspecified
21D7Unspecified
22GNDUnspecified
23NCUnspecified
24INTRUnspecified
25D6Unspecified
26D4Unspecified
27D2Unspecified
28D0Unspecified
29OP6Unspecified
30OP4Unspecified
31OP2Unspecified
32OP0Unspecified
33TXDAUnspecified
34NCUnspecified
35RXDAUnspecified
36X1/CLKUnspecified
37X2Unspecified
38RESET#Unspecified
39CSUnspecified
40IP2Unspecified
41IACK#Unspecified
42IP5Unspecified
43IP4Unspecified
44VCCUnspecified

Open-source boards using it

2
  • 4 layers101.6 × 101.6 mmSBC09, the printed circuit board in 3D

    SBC09

    hoglet67/SBC09

    Respsitory for the SBC09 6809/6309 Board Design

    60 parts3
  • 2 layers196.3 × 114.7 mmMCD Rev2, the printed circuit board in 3D

    MCD Rev2

    prrtzel/GeorgeOS-Single-Board-Computer

    This was the final project for the Microcomputer Design Course at LeTourneau University.

    85 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the XR68C681CJ-F?

Yes. The symbol is EasyEDA_Cloud:XR68C681CJ-F and the footprint EasyEDA_Cloud:PLCC-44_L16.6-W16.6-P1.27-LS17.5-L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the XR68C681CJ-F?

PLCC-44(16.6x16.6), with 44 pins. Its footprint is drawn on this page.

Where is the XR68C681CJ-F datasheet?

MaxLinear publishes it: the Datasheet link on this page opens it.

Where can I order the XR68C681CJ-F?

JLCPCB lists it as part C6036618, with 0 in stock; the sellers' links on this page open their listings.

What can replace the XR68C681CJ-F?

Parts like it in the library: the TL16C2552IFNR by Texas Instruments, the TL16C550CIFNR by Texas Instruments, the ST16C2552CJ44TR-F by MaxLinear and the ST16C650ACJ44TR-F by MaxLinear. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the XR68C681CJ-F?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.