2 layers45.7 × 45.7 mm
Biscuit
hnez/BlockBot-pcb
A University project to build a programmable robot for kids (PCB design files)
52 parts
2 layers100 × 35 mm
Remote
hnez/BlockBot-pcbA University project to build a programmable robot for kids (PCB design files)
- Size
- 100 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 44
- Pads
- 143
- Tracks, vias
- 496, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Jun 2016
- Updated
- 4 Dec 2016
Overview
Remote is an open-source printed circuit board by hnez, from the hnez/BlockBot-pcb repository on GitHub. It is a 2-layer board of 100 × 35 mm with 44 parts on 44 nets, routed with 496 tracks and 38 vias.
It is built around the ATMEGA328P-AU and BAR43S. Its parts include 10 capacitors, 9 resistors, 9 connectors, 5 transistors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BAR43S
SOT-231 Pair Series Connection 200mA 30V 500nA@25V 750mA 800mV@100mA SOT-23 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
README
README.mdBlockBot - Housing 3D-Designs
This repository contains all PCB design files.
All designs are created with the KiCad EDA suite.
The directory structure is as follow:
- blocks - Brick PCB
- dk_base - Millable PCB for the "denmark base" robot
- panel - Panelized layout that combines bricks and remote into a single file for cheaper ordering
- remote - Collector unit PCB
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistors_SMD:R_0805_HandSoldering | R3, R5, R6, R8, R9 |
| 4 | 1u | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_HandSoldering | C2, C3, C4, C5 |
| 3 | 100n | Capacitors_SMD:C_0805_HandSoldering | C6, C7, C10 |
| 3 | BC358 | TO_SOT_Packages_SMD:SOT-23 | Q3, Q4, Q5 |
| 2 | 22p | Capacitors_SMD:C_0805_HandSoldering | C8, C9 |
| 2 | 2k6 | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | BAR43S | TO_SOT_Packages_SMD:SOT-23 | D1, D2 |
| 2 | BC349 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 2 | BRICK_N | custom:BigFoilCon | P4, P8 |
| 2 | BRICK_P | custom:SmallFoilCon | P3, P7 |
| 2 | TS2940 CP33 | TO_SOT_Packages_SMD:TO-252-2Lead | U1, U2 |
| 1 | 10R | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | 10k | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 10n | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 12MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | ATMEGA328P-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P6 |
| 1 | CON_RX | custom:SmallFoilCon | P2 |
| 1 | CON_TX | custom:SmallFoilCon | P1 |
| 1 | HD44780_LCD | Pin_Headers:Pin_Header_Straight_1x10 | P5 |
| 1 | JUMPER | Resistors_SMD:R_0805_HandSoldering | JP1 |
| 1 | LED | LEDs:LED-3MM | D3 |
| 1 | POT | custom:Cermet_Model23 | RV1 |
| 1 | RFM75 | custom:RFM75 | U3 |
| 1 | SEND | custom:Schurter_LSG_1301 | SW1 |
Questions
How big is the Remote PCB?
It measures 100 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remote use?
44 parts, built around the ATMEGA328P-AU and BAR43S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote KiCad files?
From the hnez/BlockBot-pcb repository on GitHub, at the commit this page was made from: the board is remote/remote.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote design in my own project?
Its repository states no licence, so its author keeps all rights: ask hnez before reusing the design.
More from hnez/BlockBot-pcb
3- 2 layers60 × 24 mm
Blocks
hnez/BlockBot-pcb
A University project to build a programmable robot for kids (PCB design files)
29 parts - 2 layers91.6 × 47.8 mm
Denmarkbase
hnez/BlockBot-pcb
A University project to build a programmable robot for kids (PCB design files)
26 parts
Similar boards
- 4 layers140.3 × 101.7 mm
Sheet1
horychen/ProjectEureka
12 phase motor drive including inverter, microcontroller-mother-board, sensing, communication, DAC, etc.
338 parts17GPL-3.0 - 2 layers130 × 90 mm
- 2 layers148 × 100 mm
Vikhr30-efi
almirpangor/VIHR-30-EFI
Блок управления впрыском и зажиганием для лодочного мотора «Вихрь-30»
98 parts - 2 layers100 × 100 mm
Kit Analogico
LuizFernandoOliveira/Kit-Front-End-Anal-gico
This work is licensed under a [Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License][cc-by-nc-nd].
290 parts - 2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers50.5 × 128.5 mm
- 2 layers152 × 88 mm
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT