hlord2000/USB-PD-PSU1USB PD PSU is an open-source printed circuit board by hlord2000, from the hlord2000/USB-PD-PSU repository on GitHub. It is a 2-layer board of 30 × 30 mm with 18 parts on 119 nets.
It is built around the ADS131M02IPW, ECMF02-4CMX8 and TPD6S300ARUK, with the SMF30A among its other parts. Its parts include 6 ICs, 5 transistors, 4 connectors, 1 diode and 1 inductor. It belongs with the power boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | DMP3014SFDE-13 | hlord2000-Package_DFN_QFN:Diodes_UDFN2020-6_Type-E | Q1, Q2, Q3, Q4, Q5 |
| 2 | Conn_01x01 | Connector:CalTest_CT3151 | J2, J3 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J4 |
| 1 | 4.7uH | Inductor_SMD_USB-PD-PSU:L_Wuerth_WE-XHMI-6060 | L1 |
| 1 | ADS131M02 | Package_DFN_QFN:WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias | U3 |
| 1 | ASCO | Oscillator:Oscillator_SMD_Abracon_ASCO-4Pin_1.6x1.2mm | X1 |
| 1 | ECMF02-4CMX8 | hlord2000-Package_DFN_QFN:ST_UQFN-8L_1.2x2.5mm_P0.5mm | U6 |
| 1 | MAX49918 | hlord2000-Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.5x2.3mm | U2 |
| 1 | SMF30A | Diode_SMD:D_SMF | D1 |
| 1 | STM32U575CGUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | TMP117xxDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U8 |
| 1 | TPD6S300A | Package_DFN_QFN:WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias | U5 |
fietser28/EL-Load
The DCL8010 electronic load module features a DC Electronic Load with several modes and protections. This project is the for the development boards for this project. There is a seperate git project for the firmware.
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
XuanTrace/half-bridge-load-cells-board
Open-source half-bridge load cell PCB design featuring the HX710A/B/C ADC chip. Supports SMD with castellation (half-hole), pin headers, and XH2.45 4-pin connectors.
Ryan-Fagan/QuadcopterPCB
Gerbers, models, & code for an STM32 quadcopter focused on reasearch applications.
ssbingo/samba-solar-track
Samba Solar Track – Solarnachführung mit Sturmschutz: Handbuch, Platine und Gehäuse für den Nachbau (10,1-Zoll-Version)
felixzero/escrocs
Repository for the ESCROCS team for the french robotics cup 2020!
It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the ADS131M02IPW, ECMF02-4CMX8, TPD6S300ARUK and SMF30A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hlord2000/USB-PD-PSU repository on GitHub, at the commit this page was made from: the board is USB-PD-PSU.kicad_pcb and its schematic USB-PD-PSU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hlord2000 before reusing the design.